Prusa Mendel (modified) PLA NORMAL 0 0.4 0 0.5 1.05 1 5.5 0 0.5 5400 1 0.2 1 5 0 0.2 3 3 3 1 2 0 0 0 0 200 95 0.5 0 0 2 2 3 0.14 100 0.3 1 0 1 2 1.8 0 999 12 7 1 0 999 2 1 1 30 1 0 Full Honeycomb Rectilinear 25 20 125 2 1 0,120,-120 0 45,-45 0 0 20 0.2 0 0 1 70 1 0.4 2 1 0 2 55 0 0 0 0 0 1 1 1 0 0 1 1 1 15 20 0 45 100 1 100 1 1 1 0 0 1 0 0 0 0 1 0 296.5 295 300 0 0 0 -1 -1 -1 1 -1 1 0,0|0,0|0,0|0,0|0,0|0,0 0 RepRap (Marlin/Repetier/Sprinter) r2 250000 1 G28 ; home all axis,G92 Z0.1 ; Set Z height to 0.1mm,G1 X4 Y4 F2000 ; Move near the front left corner,G92 E0 ; zero the extruded length,G1 Y44 E4 F1000 ; Extrude 4mm of filament in a 4cm line,G1 Y104 E6 F1000 ; Extrude 6mm of filament in a 60cm line,G92 E0 ; zero the extruded length,G1 E-1 F800 ; Retract a little,G1 Y64 F4000 ; Quickly wipe away from the filament line,G92 E0.0 ; Zero the extruder length,,,,;G28,;G92 E0.0,;G1 X8.0 F2000,;G1 Y60.0 E4.0 F1000.0,;G1 Y100.0 E8.5 F1000.0,;G92 Z0.1,;G92 E0.0 G92 E0 ; set extruder value back to 0,G1 E-2.5 F2000 ; retract 2.5mm filament speed 1500,M104 S0 ; turn off temperature,M140 S0 ; turn off heatbed,G91 ; Use Relative Coordinates,G1 Z0.6 F5000 ; Lift Nozzle by 0.6mm,G90 ; Use Absolute Coordinates,G28 X0 ; home X axis,G1 Y195 Z290; Move Y axis to end position drop bed to 290,M84 ; disable motors,M107 ; turn off fan gcode 0 Random Song 3600 0.7 0.8 0.95 12000 1002 50 1 1 1 0 0 0 1.75|1.75|1.75|1.75|1.75|1.75 15|15|15|15|15|15 1.25|1.25|1.25|1.25|1.25|1.25 0 0 0 10 0 20 1 0 0 1 1 3 1 1 0 3 12 -0.5 600 1 1 10 1 50 200 0.2 0 0 0 0 0 1 60 1.05 0.2 3 3 1 25 20 0 0 0 0 1 60 1.05 0 0 0 0 1 60 1.05 0 0 0 0 1 60 1.05