; KISSlicer - PRO
; Windows
; version 1.4.5.10
; Built: Sep  2 2014, 20:18:09
; Running on 4 cores
;
; Saved: Wed Oct 29 07:21:53 2014
; 'box-halfinch_KS11_NoCubeitMod.bfb'
;
; *** Printer Settings ***
;
; printer_name = Cubex PLA
; bed_STL_filename = BedCubeX.stl
; extension = bfb
; cost_per_hour = 0
; g_code_prefix = 5E4669726D776172653A56312E30370A3B205B6D6D5D
;     206D6F64650A4732310A3B206162736F6C757465206D6F64650A4739
;     300A
; g_code_warm = 3B2053656C6563742065787472756465722C207761726D
;     2C2070757267650A0A3B204266422D7374796C650A4D3534320A4D3C
;     4558542B313E303420533C54454D503E0A4D35353C4558542B313E20
;     5033303030205338300A4D353433
; g_code_cool = 3B2047756172616E746565642073616D65206578747275
;     6465722C20636F6F6C696E6720646F776E0A0A3B204266422D737479
;     6C650A4D3C4558542B313E303420533C54454D503E
; g_code_N_layers = 3B204D617962652072652D686F6D65205820262059
;     3F
; g_code_postfix = 4D3130330A4D3130342053300A4D3230342053300A4
;     D3330342053300A
; post_process = NULL
; every_N_layers = 0
; num_extruders = 2
; firmware_type = 0
; add_comments = 1
; fan_on = M106
; fan_off = M107
; fan_pwm = 1
; add_m101_g10 = 0
; z_speed_mm_per_s = 3.5
; z_settle_mm = 0.25
; bed_size_x_mm = 275
; bed_size_y_mm = 265
; bed_size_z_mm = 240
; ext_radius = 0
; bed_offset_x_mm = -35
; bed_offset_y_mm = 0
; bed_offset_z_mm = 0
; bed_roughness_mm = 0
; round_bed = 0
; travel_speed_mm_per_s = 200
; first_layer_speed_mm_per_s = 15
; dmax_per_layer_mm_per_s = 50
; xy_accel_mm_per_s_per_s = 1500
; xy_steps_per_mm = 150
; lo_speed_perim_mm_per_s = 25
; lo_speed_solid_mm_per_s = 25
; lo_speed_sparse_mm_per_s = 35
; hi_speed_perim_mm_per_s = 50
; hi_speed_solid_mm_per_s = 50
; hi_speed_sparse_mm_per_s = 50
; ext_gain_1 = 0.0225
; ext_material_1 = 7
; ext_axis_1 = 0
; ext_gain_2 = 0.0225
; ext_material_2 = 2
; ext_axis_2 = 0
; ext_Xoff_2 = 0
; ext_Yoff_2 = 0
; ext_gain_3 = 1
; ext_material_3 = 0
; ext_axis_3 = 0
; ext_Xoff_3 = 0
; ext_Yoff_3 = 0
; ext_gain_4 = 1
; ext_material_4 = 0
; ext_axis_4 = 0
; ext_Xoff_4 = 0
; ext_Yoff_4 = 0
; model_ext = 0
; support_ext = 1
; support_body_ext = 1
; raft_ext = 1
; solid_loop_overlap_fraction = 0.6
;
; *** Material Settings for Extruder 1 ***
;
; material_name = PLA 3Dfactories Thickness 0.2
; g_code_matl = 3B204D617962652073657420736F6D65206D6174657269
;     616C2D737065636966696320472D636F64653F
; fan_Z_mm = 0.5
; fan_loops_percent = 100
; fan_inside_percent = 100
; fan_cool_percent = 100
; temperature_C = 195
; keep_warm_C = 150
; first_layer_C = 230
; bed_C = 111
; sec_per_C_per_C = 0.005
; flow_min_mm3_per_s = 0.01
; flow_max_mm3_per_s = 10
; destring_suck = 0.04
; destring_prime = 0.1
; destring_min_mm = 0
; destring_trigger_mm = 0
; destring_speed_mm_per_s = 111
; Z_lift_mm = 0
; min_layer_time_s = 0
; wipe_mm = 1
; cost_per_cm3 = 0.025
; flowrate_tweak = 1.05
; fiber_dia_mm = 1.75
; color = 1164050176
;
; *** Material Settings for Extruder 2 ***
;
; material_name = ABS Cubex Thickness 0.2
; g_code_matl = 3B204D617962652073657420736F6D65206D6174657269
;     616C2D737065636966696320472D636F64653F
; fan_Z_mm = 0.3
; fan_loops_percent = 100
; fan_inside_percent = 100
; fan_cool_percent = 100
; temperature_C = 260
; keep_warm_C = 150
; first_layer_C = 270
; bed_C = 85
; sec_per_C_per_C = 0.008
; flow_min_mm3_per_s = 0.01
; flow_max_mm3_per_s = 10
; destring_suck = 0.035
; destring_prime = 0.1
; destring_min_mm = 0
; destring_trigger_mm = 0
; destring_speed_mm_per_s = 110
; Z_lift_mm = 0
; min_layer_time_s = 0
; wipe_mm = 0.1
; cost_per_cm3 = 0.003
; flowrate_tweak = 1.05
; fiber_dia_mm = 1.7
; color = 0
;
; *** Style Settings ***
;
; style_name = PLA Thickness 0.2
; layer_thickness_mm = 0.2
; extrusion_width_mm = 0.5
; num_loops = 2
; skin_thickness_mm = 1
; infill_extrusion_width = 0.5
; infill_density_denominator = 4
; stacked_layers = 1
; use_destring = 1
; use_wipe = 1
; loops_insideout = 1
; infill_st_oct_rnd = 0
; inset_surface_xy_mm = 0
; seam_jitter_degrees = 0
; seam_depth_scaler = 0.5
; seam_gap_scaler = 0.7
; seam_angle_degrees = 45
;
; *** Support Settings ***
;
; support_name = sample support
; support_sheathe = 0
; support_density = 3
; solid_interface = 1
; support_inflate_mm = 0
; support_gap_mm = 0.5
; support_angle_deg = 30
; support_z_max_mm = -1
; sheathe_z_max_mm = -1
; raft_mode = 0
; prime_pillar_mode = 0
; raft_inflate_mm = 1
; brim_mm = 0
; brim_ht_mm = 0
; brim_fillet = 0
;
; *** Actual Slicing Settings As Used ***
;
; layer_thickness_mm = 0.2
; extrusion_width = 0.5
; num_ISOs = 2
; wall_thickness = 1
; infill_style = 5
; support_style = -3
; solid_interface = 1
; support_angle = 29.9
; destring_min_mm = 0
; stacked_infill_layers = 1
; raft_style = 0
; extra_raft_depth = 0
; oversample_res_mm = 0.125
; crowning_threshold_mm = 1
; loops_insideout = 1
; solid_loop_overlap_fraction = 0.6
; inflate_raft_mm = 0
; inflate_support_mm = 0
; model_support_gap_mm = 0.5
; brim_mm = 0
; brim_ht_mm = -0
; infill_st_oct_rnd = 0
; support_Z_max_mm = 1e+020
; sheathe_Z_max_mm = 0
; inset_surface_xy_mm = 0
; seam_jitter_degrees = 0
; seam_depth_scaler = 0.5
; seam_gap_scaler = 0.7
; seam_angle_degrees = 45
; Speed vs Quality = 0.85
; Perimeter Speed = 28.75
; Solid Speed = 28.75
; Sparse Speed = 37.25
;
; *** G-code Prefix ***
;
^Firmware:V1.07
; [mm] mode
G21
; absolute mode
G90

;
; *** Main G-code ***
;
; BEGIN_LAYER_OBJECT z=0.20
;
; *** Warming Extruder 1 to 230 C ***
; Select extruder, warm, purge
; BfB-style
M542
M104 S230
M551 P3000 S80
M543
;
; enable auto-destring
M227 S119 P296
;
; extruder deciRPM
M108 S8.1
;
; 'Loop Path', 0.8 [RPM], 14.9 [head mm/s]
G1 X-16.68 Y5.58 Z0.45 F12000
G1 X-16.68 Y5.58 Z0.2 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z0.2 F895.6
G1 X-27.68 Y-5.58 Z0.2 F895.6
G1 X-16.52 Y-5.58 Z0.2 F895.6
G1 X-16.52 Y5.47 Z0.2 F895.6
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 15.0 [head mm/s]
G1 X-16.52 Y5.47 Z0.2 F12000
G1 X-16.52 Y5.47 Z0.2 F900
G1 X-16.68 Y5.58 Z0.2 F900
G1 X-17.68 Y5.58 Z0.2 F900
; extruder deciRPM
M108 S8.1
;
; 'Perimeter Path', 0.8 [RPM], 14.9 [head mm/s]
G1 X-16.17 Y5.87 Z0.2 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z0.2 F895.6
G1 X-28.19 Y6.09 Z0.2 F895.6
G1 X-28.19 Y-6.09 Z0.2 F895.6
G1 X-16.01 Y-6.09 Z0.2 F895.6
G1 X-16.01 Y5.95 Z0.2 F895.6
G1 X-16.23 Y5.93 Z0.2 F895.6
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 15.0 [head mm/s]
G1 X-16.23 Y5.93 Z0.2 F12000
G1 X-16.23 Y5.93 Z0.2 F900
G1 X-16.17 Y5.87 Z0.2 F900
G1 X-16.15 Y6.09 Z0.2 F900
G1 X-16.93 Y6.09 Z0.2 F900
; extruder deciRPM
M108 S8.1
;
; 'Solid Path', 0.8 [RPM], 14.9 [head mm/s]
G1 X-16.87 Y4.67 Z0.2 F12000
; extruder on
M101
G1 X-17.35 Y5.15 Z0.2 F895.6
G1 X-18.06 Y5.15 Z0.2 F895.6
G1 X-16.95 Y4.04 Z0.2 F895.6
G1 X-16.95 Y3.33 Z0.2 F895.6
G1 X-18.77 Y5.15 Z0.2 F895.6
G1 X-19.48 Y5.15 Z0.2 F895.6
G1 X-16.95 Y2.62 Z0.2 F895.6
G1 X-16.95 Y1.92 Z0.2 F895.6
G1 X-20.18 Y5.15 Z0.2 F895.6
G1 X-20.89 Y5.15 Z0.2 F895.6
G1 X-16.95 Y1.21 Z0.2 F895.6
G1 X-16.95 Y0.5 Z0.2 F895.6
G1 X-21.6 Y5.15 Z0.2 F895.6
G1 X-22.3 Y5.15 Z0.2 F895.6
G1 X-16.95 Y-0.2 Z0.2 F895.6
G1 X-16.95 Y-0.91 Z0.2 F895.6
G1 X-23.01 Y5.15 Z0.2 F895.6
G1 X-23.72 Y5.15 Z0.2 F895.6
G1 X-16.95 Y-1.62 Z0.2 F895.6
G1 X-16.95 Y-2.33 Z0.2 F895.6
G1 X-24.43 Y5.15 Z0.2 F895.6
G1 X-25.13 Y5.15 Z0.2 F895.6
G1 X-16.95 Y-3.03 Z0.2 F895.6
G1 X-16.95 Y-3.74 Z0.2 F895.6
G1 X-25.84 Y5.15 Z0.2 F895.6
G1 X-26.55 Y5.15 Z0.2 F895.6
G1 X-16.95 Y-4.45 Z0.2 F895.6
G1 X-16.95 Y-5.15 Z0.2 F895.6
G1 X-27.25 Y5.15 Z0.2 F895.6
G1 X-27.25 Y4.45 Z0.2 F895.6
G1 X-17.65 Y-5.15 Z0.2 F895.6
G1 X-18.36 Y-5.15 Z0.2 F895.6
G1 X-27.25 Y3.74 Z0.2 F895.6
G1 X-27.25 Y3.03 Z0.2 F895.6
G1 X-19.07 Y-5.15 Z0.2 F895.6
G1 X-19.77 Y-5.15 Z0.2 F895.6
G1 X-27.25 Y2.33 Z0.2 F895.6
G1 X-27.25 Y1.62 Z0.2 F895.6
G1 X-20.48 Y-5.15 Z0.2 F895.6
G1 X-21.19 Y-5.15 Z0.2 F895.6
G1 X-27.25 Y0.91 Z0.2 F895.6
G1 X-27.25 Y0.2 Z0.2 F895.6
G1 X-21.9 Y-5.15 Z0.2 F895.6
G1 X-22.6 Y-5.15 Z0.2 F895.6
G1 X-27.25 Y-0.5 Z0.2 F895.6
G1 X-27.25 Y-1.21 Z0.2 F895.6
G1 X-23.31 Y-5.15 Z0.2 F895.6
G1 X-24.02 Y-5.15 Z0.2 F895.6
G1 X-27.25 Y-1.92 Z0.2 F895.6
G1 X-27.25 Y-2.62 Z0.2 F895.6
G1 X-24.72 Y-5.15 Z0.2 F895.6
G1 X-25.43 Y-5.15 Z0.2 F895.6
G1 X-27.25 Y-3.33 Z0.2 F895.6
G1 X-27.25 Y-4.04 Z0.2 F895.6
G1 X-26.14 Y-5.15 Z0.2 F895.6
G1 X-26.85 Y-5.15 Z0.2 F895.6
G1 X-27.28 Y-4.72 Z0.2 F895.6
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 15.0 [head mm/s]
G1 X-27.28 Y-4.72 Z0.2 F12000
G1 X-27.28 Y-4.72 Z0.2 F900
G1 X-26.85 Y-5.15 Z0.2 F900
G1 X-26.45 Y-5.15 Z0.2 F900
;
; Post-layer lift
G1 X-26.45 Y-5.15 Z0.65 F210
; END_LAYER_OBJECT z=0.20
; BEGIN_LAYER_OBJECT z=0.40
;
; *** Warming Extruder 1 to 195 C ***
; Select extruder, warm, purge
; BfB-style
M542
M104 S195
M551 P3000 S80
M543
;
; enable auto-destring
M227 S119 P296
;
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z0.65 F12000
G1 X-16.68 Y5.58 Z0.4 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z0.4 F1725.1
G1 X-27.68 Y-5.58 Z0.4 F1725.1
G1 X-16.52 Y-5.58 Z0.4 F1725.1
G1 X-16.52 Y5.47 Z0.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z0.4 F12000
G1 X-16.52 Y5.47 Z0.4 F2235
G1 X-16.68 Y5.58 Z0.4 F2235
G1 X-17.68 Y5.58 Z0.4 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z0.4 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z0.4 F1725.1
G1 X-28.19 Y6.09 Z0.4 F1725.1
G1 X-28.19 Y-6.09 Z0.4 F1725.1
G1 X-16.01 Y-6.09 Z0.4 F1725.1
G1 X-16.01 Y5.95 Z0.4 F1725.1
G1 X-16.23 Y5.93 Z0.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z0.4 F12000
G1 X-16.23 Y5.93 Z0.4 F2235
G1 X-16.17 Y5.87 Z0.4 F2235
G1 X-16.15 Y6.09 Z0.4 F2235
G1 X-16.93 Y6.09 Z0.4 F2235
; extruder deciRPM
M108 S15.7
;
; 'Solid Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.87 Y-4.67 Z0.4 F12000
; extruder on
M101
G1 X-17.35 Y-5.15 Z0.4 F1725.1
G1 X-18.06 Y-5.15 Z0.4 F1725.1
G1 X-16.95 Y-4.04 Z0.4 F1725.1
G1 X-16.95 Y-3.33 Z0.4 F1725.1
G1 X-18.77 Y-5.15 Z0.4 F1725.1
G1 X-19.48 Y-5.15 Z0.4 F1725.1
G1 X-16.95 Y-2.62 Z0.4 F1725.1
G1 X-16.95 Y-1.92 Z0.4 F1725.1
G1 X-20.18 Y-5.15 Z0.4 F1725.1
G1 X-20.89 Y-5.15 Z0.4 F1725.1
G1 X-16.95 Y-1.21 Z0.4 F1725.1
G1 X-16.95 Y-0.5 Z0.4 F1725.1
G1 X-21.6 Y-5.15 Z0.4 F1725.1
G1 X-22.3 Y-5.15 Z0.4 F1725.1
G1 X-16.95 Y0.2 Z0.4 F1725.1
G1 X-16.95 Y0.91 Z0.4 F1725.1
G1 X-23.01 Y-5.15 Z0.4 F1725.1
G1 X-23.72 Y-5.15 Z0.4 F1725.1
G1 X-16.95 Y1.62 Z0.4 F1725.1
G1 X-16.95 Y2.33 Z0.4 F1725.1
G1 X-24.43 Y-5.15 Z0.4 F1725.1
G1 X-25.13 Y-5.15 Z0.4 F1725.1
G1 X-16.95 Y3.03 Z0.4 F1725.1
G1 X-16.95 Y3.74 Z0.4 F1725.1
G1 X-25.84 Y-5.15 Z0.4 F1725.1
G1 X-26.55 Y-5.15 Z0.4 F1725.1
G1 X-16.95 Y4.45 Z0.4 F1725.1
G1 X-16.95 Y5.15 Z0.4 F1725.1
G1 X-27.25 Y-5.15 Z0.4 F1725.1
G1 X-27.25 Y-4.45 Z0.4 F1725.1
G1 X-17.65 Y5.15 Z0.4 F1725.1
G1 X-18.36 Y5.15 Z0.4 F1725.1
G1 X-27.25 Y-3.74 Z0.4 F1725.1
G1 X-27.25 Y-3.03 Z0.4 F1725.1
G1 X-19.07 Y5.15 Z0.4 F1725.1
G1 X-19.77 Y5.15 Z0.4 F1725.1
G1 X-27.25 Y-2.33 Z0.4 F1725.1
G1 X-27.25 Y-1.62 Z0.4 F1725.1
G1 X-20.48 Y5.15 Z0.4 F1725.1
G1 X-21.19 Y5.15 Z0.4 F1725.1
G1 X-27.25 Y-0.91 Z0.4 F1725.1
G1 X-27.25 Y-0.2 Z0.4 F1725.1
G1 X-21.9 Y5.15 Z0.4 F1725.1
G1 X-22.6 Y5.15 Z0.4 F1725.1
G1 X-27.25 Y0.5 Z0.4 F1725.1
G1 X-27.25 Y1.21 Z0.4 F1725.1
G1 X-23.31 Y5.15 Z0.4 F1725.1
G1 X-24.02 Y5.15 Z0.4 F1725.1
G1 X-27.25 Y1.92 Z0.4 F1725.1
G1 X-27.25 Y2.62 Z0.4 F1725.1
G1 X-24.72 Y5.15 Z0.4 F1725.1
G1 X-25.43 Y5.15 Z0.4 F1725.1
G1 X-27.25 Y3.33 Z0.4 F1725.1
G1 X-27.25 Y4.04 Z0.4 F1725.1
G1 X-26.14 Y5.15 Z0.4 F1725.1
G1 X-26.85 Y5.15 Z0.4 F1725.1
G1 X-27.28 Y4.72 Z0.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.28 Y4.72 Z0.4 F12000
G1 X-27.28 Y4.72 Z0.4 F2235
G1 X-26.85 Y5.15 Z0.4 F2235
G1 X-26.45 Y5.15 Z0.4 F2235
;
; Post-layer lift
G1 X-26.45 Y5.15 Z0.85 F210
; END_LAYER_OBJECT z=0.40
; BEGIN_LAYER_OBJECT z=0.60
; fan on
M106
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z0.85 F12000
G1 X-16.68 Y5.58 Z0.6 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z0.6 F1725.1
G1 X-27.68 Y-5.58 Z0.6 F1725.1
G1 X-16.52 Y-5.58 Z0.6 F1725.1
G1 X-16.52 Y5.47 Z0.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z0.6 F12000
G1 X-16.52 Y5.47 Z0.6 F2235
G1 X-16.68 Y5.58 Z0.6 F2235
G1 X-17.68 Y5.58 Z0.6 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z0.6 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z0.6 F1725.1
G1 X-28.19 Y6.09 Z0.6 F1725.1
G1 X-28.19 Y-6.09 Z0.6 F1725.1
G1 X-16.01 Y-6.09 Z0.6 F1725.1
G1 X-16.01 Y5.95 Z0.6 F1725.1
G1 X-16.23 Y5.93 Z0.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z0.6 F12000
G1 X-16.23 Y5.93 Z0.6 F2235
G1 X-16.17 Y5.87 Z0.6 F2235
G1 X-16.15 Y6.09 Z0.6 F2235
G1 X-16.93 Y6.09 Z0.6 F2235
; extruder deciRPM
M108 S15.7
;
; 'Solid Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.87 Y4.67 Z0.6 F12000
; extruder on
M101
G1 X-17.35 Y5.15 Z0.6 F1725.1
G1 X-18.06 Y5.15 Z0.6 F1725.1
G1 X-16.95 Y4.04 Z0.6 F1725.1
G1 X-16.95 Y3.33 Z0.6 F1725.1
G1 X-18.77 Y5.15 Z0.6 F1725.1
G1 X-19.48 Y5.15 Z0.6 F1725.1
G1 X-16.95 Y2.62 Z0.6 F1725.1
G1 X-16.95 Y1.92 Z0.6 F1725.1
G1 X-20.18 Y5.15 Z0.6 F1725.1
G1 X-20.89 Y5.15 Z0.6 F1725.1
G1 X-16.95 Y1.21 Z0.6 F1725.1
G1 X-16.95 Y0.5 Z0.6 F1725.1
G1 X-21.6 Y5.15 Z0.6 F1725.1
G1 X-22.3 Y5.15 Z0.6 F1725.1
G1 X-16.95 Y-0.2 Z0.6 F1725.1
G1 X-16.95 Y-0.91 Z0.6 F1725.1
G1 X-23.01 Y5.15 Z0.6 F1725.1
G1 X-23.72 Y5.15 Z0.6 F1725.1
G1 X-16.95 Y-1.62 Z0.6 F1725.1
G1 X-16.95 Y-2.33 Z0.6 F1725.1
G1 X-24.43 Y5.15 Z0.6 F1725.1
G1 X-25.13 Y5.15 Z0.6 F1725.1
G1 X-16.95 Y-3.03 Z0.6 F1725.1
G1 X-16.95 Y-3.74 Z0.6 F1725.1
G1 X-25.84 Y5.15 Z0.6 F1725.1
G1 X-26.55 Y5.15 Z0.6 F1725.1
G1 X-16.95 Y-4.45 Z0.6 F1725.1
G1 X-16.95 Y-5.15 Z0.6 F1725.1
G1 X-27.25 Y5.15 Z0.6 F1725.1
G1 X-27.25 Y4.45 Z0.6 F1725.1
G1 X-17.65 Y-5.15 Z0.6 F1725.1
G1 X-18.36 Y-5.15 Z0.6 F1725.1
G1 X-27.25 Y3.74 Z0.6 F1725.1
G1 X-27.25 Y3.03 Z0.6 F1725.1
G1 X-19.07 Y-5.15 Z0.6 F1725.1
G1 X-19.77 Y-5.15 Z0.6 F1725.1
G1 X-27.25 Y2.33 Z0.6 F1725.1
G1 X-27.25 Y1.62 Z0.6 F1725.1
G1 X-20.48 Y-5.15 Z0.6 F1725.1
G1 X-21.19 Y-5.15 Z0.6 F1725.1
G1 X-27.25 Y0.91 Z0.6 F1725.1
G1 X-27.25 Y0.2 Z0.6 F1725.1
G1 X-21.9 Y-5.15 Z0.6 F1725.1
G1 X-22.6 Y-5.15 Z0.6 F1725.1
G1 X-27.25 Y-0.5 Z0.6 F1725.1
G1 X-27.25 Y-1.21 Z0.6 F1725.1
G1 X-23.31 Y-5.15 Z0.6 F1725.1
G1 X-24.02 Y-5.15 Z0.6 F1725.1
G1 X-27.25 Y-1.92 Z0.6 F1725.1
G1 X-27.25 Y-2.62 Z0.6 F1725.1
G1 X-24.72 Y-5.15 Z0.6 F1725.1
G1 X-25.43 Y-5.15 Z0.6 F1725.1
G1 X-27.25 Y-3.33 Z0.6 F1725.1
G1 X-27.25 Y-4.04 Z0.6 F1725.1
G1 X-26.14 Y-5.15 Z0.6 F1725.1
G1 X-26.85 Y-5.15 Z0.6 F1725.1
G1 X-27.28 Y-4.72 Z0.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.28 Y-4.72 Z0.6 F12000
G1 X-27.28 Y-4.72 Z0.6 F2235
G1 X-26.85 Y-5.15 Z0.6 F2235
G1 X-26.45 Y-5.15 Z0.6 F2235
;
; Post-layer lift
G1 X-26.45 Y-5.15 Z1.05 F210
; END_LAYER_OBJECT z=0.60
; BEGIN_LAYER_OBJECT z=0.80
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z1.05 F12000
G1 X-16.68 Y5.58 Z0.8 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z0.8 F1725.1
G1 X-27.68 Y-5.58 Z0.8 F1725.1
G1 X-16.52 Y-5.58 Z0.8 F1725.1
G1 X-16.52 Y5.47 Z0.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z0.8 F12000
G1 X-16.52 Y5.47 Z0.8 F2235
G1 X-16.68 Y5.58 Z0.8 F2235
G1 X-17.68 Y5.58 Z0.8 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z0.8 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z0.8 F1725.1
G1 X-28.19 Y6.09 Z0.8 F1725.1
G1 X-28.19 Y-6.09 Z0.8 F1725.1
G1 X-16.01 Y-6.09 Z0.8 F1725.1
G1 X-16.01 Y5.95 Z0.8 F1725.1
G1 X-16.23 Y5.93 Z0.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z0.8 F12000
G1 X-16.23 Y5.93 Z0.8 F2235
G1 X-16.17 Y5.87 Z0.8 F2235
G1 X-16.15 Y6.09 Z0.8 F2235
G1 X-16.93 Y6.09 Z0.8 F2235
; extruder deciRPM
M108 S15.7
;
; 'Solid Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.87 Y-4.67 Z0.8 F12000
; extruder on
M101
G1 X-17.35 Y-5.15 Z0.8 F1725.1
G1 X-18.06 Y-5.15 Z0.8 F1725.1
G1 X-16.95 Y-4.04 Z0.8 F1725.1
G1 X-16.95 Y-3.33 Z0.8 F1725.1
G1 X-18.77 Y-5.15 Z0.8 F1725.1
G1 X-19.48 Y-5.15 Z0.8 F1725.1
G1 X-16.95 Y-2.62 Z0.8 F1725.1
G1 X-16.95 Y-1.92 Z0.8 F1725.1
G1 X-20.18 Y-5.15 Z0.8 F1725.1
G1 X-20.89 Y-5.15 Z0.8 F1725.1
G1 X-16.95 Y-1.21 Z0.8 F1725.1
G1 X-16.95 Y-0.5 Z0.8 F1725.1
G1 X-21.6 Y-5.15 Z0.8 F1725.1
G1 X-22.3 Y-5.15 Z0.8 F1725.1
G1 X-16.95 Y0.2 Z0.8 F1725.1
G1 X-16.95 Y0.91 Z0.8 F1725.1
G1 X-23.01 Y-5.15 Z0.8 F1725.1
G1 X-23.72 Y-5.15 Z0.8 F1725.1
G1 X-16.95 Y1.62 Z0.8 F1725.1
G1 X-16.95 Y2.33 Z0.8 F1725.1
G1 X-24.43 Y-5.15 Z0.8 F1725.1
G1 X-25.13 Y-5.15 Z0.8 F1725.1
G1 X-16.95 Y3.03 Z0.8 F1725.1
G1 X-16.95 Y3.74 Z0.8 F1725.1
G1 X-25.84 Y-5.15 Z0.8 F1725.1
G1 X-26.55 Y-5.15 Z0.8 F1725.1
G1 X-16.95 Y4.45 Z0.8 F1725.1
G1 X-16.95 Y5.15 Z0.8 F1725.1
G1 X-27.25 Y-5.15 Z0.8 F1725.1
G1 X-27.25 Y-4.45 Z0.8 F1725.1
G1 X-17.65 Y5.15 Z0.8 F1725.1
G1 X-18.36 Y5.15 Z0.8 F1725.1
G1 X-27.25 Y-3.74 Z0.8 F1725.1
G1 X-27.25 Y-3.03 Z0.8 F1725.1
G1 X-19.07 Y5.15 Z0.8 F1725.1
G1 X-19.77 Y5.15 Z0.8 F1725.1
G1 X-27.25 Y-2.33 Z0.8 F1725.1
G1 X-27.25 Y-1.62 Z0.8 F1725.1
G1 X-20.48 Y5.15 Z0.8 F1725.1
G1 X-21.19 Y5.15 Z0.8 F1725.1
G1 X-27.25 Y-0.91 Z0.8 F1725.1
G1 X-27.25 Y-0.2 Z0.8 F1725.1
G1 X-21.9 Y5.15 Z0.8 F1725.1
G1 X-22.6 Y5.15 Z0.8 F1725.1
G1 X-27.25 Y0.5 Z0.8 F1725.1
G1 X-27.25 Y1.21 Z0.8 F1725.1
G1 X-23.31 Y5.15 Z0.8 F1725.1
G1 X-24.02 Y5.15 Z0.8 F1725.1
G1 X-27.25 Y1.92 Z0.8 F1725.1
G1 X-27.25 Y2.62 Z0.8 F1725.1
G1 X-24.72 Y5.15 Z0.8 F1725.1
G1 X-25.43 Y5.15 Z0.8 F1725.1
G1 X-27.25 Y3.33 Z0.8 F1725.1
G1 X-27.25 Y4.04 Z0.8 F1725.1
G1 X-26.14 Y5.15 Z0.8 F1725.1
G1 X-26.85 Y5.15 Z0.8 F1725.1
G1 X-27.28 Y4.72 Z0.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.28 Y4.72 Z0.8 F12000
G1 X-27.28 Y4.72 Z0.8 F2235
G1 X-26.85 Y5.15 Z0.8 F2235
G1 X-26.45 Y5.15 Z0.8 F2235
;
; Post-layer lift
G1 X-26.45 Y5.15 Z1.25 F210
; END_LAYER_OBJECT z=0.80
; BEGIN_LAYER_OBJECT z=1.00
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z1.25 F12000
G1 X-16.68 Y5.58 Z1 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z1 F1725.1
G1 X-27.68 Y-5.58 Z1 F1725.1
G1 X-16.52 Y-5.58 Z1 F1725.1
G1 X-16.52 Y5.47 Z1 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z1 F12000
G1 X-16.52 Y5.47 Z1 F2235
G1 X-16.68 Y5.58 Z1 F2235
G1 X-17.68 Y5.58 Z1 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z1 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z1 F1725.1
G1 X-28.19 Y6.09 Z1 F1725.1
G1 X-28.19 Y-6.09 Z1 F1725.1
G1 X-16.01 Y-6.09 Z1 F1725.1
G1 X-16.01 Y5.95 Z1 F1725.1
G1 X-16.23 Y5.93 Z1 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z1 F12000
G1 X-16.23 Y5.93 Z1 F2235
G1 X-16.17 Y5.87 Z1 F2235
G1 X-16.15 Y6.09 Z1 F2235
G1 X-16.93 Y6.09 Z1 F2235
; extruder deciRPM
M108 S15.7
;
; 'Solid Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.87 Y4.67 Z1 F12000
; extruder on
M101
G1 X-17.35 Y5.15 Z1 F1725.1
G1 X-18.06 Y5.15 Z1 F1725.1
G1 X-16.95 Y4.04 Z1 F1725.1
G1 X-16.95 Y3.33 Z1 F1725.1
G1 X-18.77 Y5.15 Z1 F1725.1
G1 X-19.48 Y5.15 Z1 F1725.1
G1 X-16.95 Y2.62 Z1 F1725.1
G1 X-16.95 Y1.92 Z1 F1725.1
G1 X-20.18 Y5.15 Z1 F1725.1
G1 X-20.89 Y5.15 Z1 F1725.1
G1 X-16.95 Y1.21 Z1 F1725.1
G1 X-16.95 Y0.5 Z1 F1725.1
G1 X-21.6 Y5.15 Z1 F1725.1
G1 X-22.3 Y5.15 Z1 F1725.1
G1 X-16.95 Y-0.2 Z1 F1725.1
G1 X-16.95 Y-0.91 Z1 F1725.1
G1 X-23.01 Y5.15 Z1 F1725.1
G1 X-23.72 Y5.15 Z1 F1725.1
G1 X-16.95 Y-1.62 Z1 F1725.1
G1 X-16.95 Y-2.33 Z1 F1725.1
G1 X-24.43 Y5.15 Z1 F1725.1
G1 X-25.13 Y5.15 Z1 F1725.1
G1 X-16.95 Y-3.03 Z1 F1725.1
G1 X-16.95 Y-3.74 Z1 F1725.1
G1 X-25.84 Y5.15 Z1 F1725.1
G1 X-26.55 Y5.15 Z1 F1725.1
G1 X-16.95 Y-4.45 Z1 F1725.1
G1 X-16.95 Y-5.15 Z1 F1725.1
G1 X-27.25 Y5.15 Z1 F1725.1
G1 X-27.25 Y4.45 Z1 F1725.1
G1 X-17.65 Y-5.15 Z1 F1725.1
G1 X-18.36 Y-5.15 Z1 F1725.1
G1 X-27.25 Y3.74 Z1 F1725.1
G1 X-27.25 Y3.03 Z1 F1725.1
G1 X-19.07 Y-5.15 Z1 F1725.1
G1 X-19.77 Y-5.15 Z1 F1725.1
G1 X-27.25 Y2.33 Z1 F1725.1
G1 X-27.25 Y1.62 Z1 F1725.1
G1 X-20.48 Y-5.15 Z1 F1725.1
G1 X-21.19 Y-5.15 Z1 F1725.1
G1 X-27.25 Y0.91 Z1 F1725.1
G1 X-27.25 Y0.2 Z1 F1725.1
G1 X-21.9 Y-5.15 Z1 F1725.1
G1 X-22.6 Y-5.15 Z1 F1725.1
G1 X-27.25 Y-0.5 Z1 F1725.1
G1 X-27.25 Y-1.21 Z1 F1725.1
G1 X-23.31 Y-5.15 Z1 F1725.1
G1 X-24.02 Y-5.15 Z1 F1725.1
G1 X-27.25 Y-1.92 Z1 F1725.1
G1 X-27.25 Y-2.62 Z1 F1725.1
G1 X-24.72 Y-5.15 Z1 F1725.1
G1 X-25.43 Y-5.15 Z1 F1725.1
G1 X-27.25 Y-3.33 Z1 F1725.1
G1 X-27.25 Y-4.04 Z1 F1725.1
G1 X-26.14 Y-5.15 Z1 F1725.1
G1 X-26.85 Y-5.15 Z1 F1725.1
G1 X-27.28 Y-4.72 Z1 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.28 Y-4.72 Z1 F12000
G1 X-27.28 Y-4.72 Z1 F2235
G1 X-26.85 Y-5.15 Z1 F2235
G1 X-26.45 Y-5.15 Z1 F2235
;
; Post-layer lift
G1 X-26.45 Y-5.15 Z1.45 F210
; END_LAYER_OBJECT z=1.00
; BEGIN_LAYER_OBJECT z=1.20
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z1.45 F12000
G1 X-16.68 Y5.58 Z1.2 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z1.2 F1725.1
G1 X-27.68 Y-5.58 Z1.2 F1725.1
G1 X-16.52 Y-5.58 Z1.2 F1725.1
G1 X-16.52 Y5.47 Z1.2 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z1.2 F12000
G1 X-16.52 Y5.47 Z1.2 F2235
G1 X-16.68 Y5.58 Z1.2 F2235
G1 X-17.68 Y5.58 Z1.2 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z1.2 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z1.2 F1725.1
G1 X-28.19 Y6.09 Z1.2 F1725.1
G1 X-28.19 Y-6.09 Z1.2 F1725.1
G1 X-16.01 Y-6.09 Z1.2 F1725.1
G1 X-16.01 Y5.95 Z1.2 F1725.1
G1 X-16.23 Y5.93 Z1.2 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z1.2 F12000
G1 X-16.23 Y5.93 Z1.2 F2235
G1 X-16.17 Y5.87 Z1.2 F2235
G1 X-16.15 Y6.09 Z1.2 F2235
G1 X-16.93 Y6.09 Z1.2 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y3.2 Z1.2 F12000
; extruder on
M101
G1 X-25.3 Y-5.32 Z1.2 F2234.2
G1 X-24.83 Y-5.29 Z1.2 F2234.2
G1 X-20.11 Y-5.3 Z1.2 F2234.2
G1 X-19.64 Y-5.32 Z1.2 F2234.2
G1 X-16.78 Y-2.46 Z1.2 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y-2.46 Z1.2 F12000
G1 X-16.78 Y-2.46 Z1.2 F2235
G1 X-17.49 Y-3.16 Z1.2 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-20.31 Y5.32 Z1.2 F12000
; extruder on
M101
G1 X-27.42 Y-1.79 Z1.2 F2234.2
G1 X-27.39 Y-1.31 Z1.2 F2234.2
G1 X-27.4 Y3.4 Z1.2 F2234.2
G1 X-27.42 Y3.87 Z1.2 F2234.2
G1 X-25.97 Y5.32 Z1.2 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-25.97 Y5.32 Z1.2 F12000
G1 X-25.97 Y5.32 Z1.2 F2235
G1 X-26.68 Y4.61 Z1.2 F2235
;
; Post-layer lift
G1 X-26.68 Y4.61 Z1.65 F210
; END_LAYER_OBJECT z=1.20
; BEGIN_LAYER_OBJECT z=1.40
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z1.65 F12000
G1 X-16.68 Y5.58 Z1.4 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z1.4 F1725.1
G1 X-27.68 Y-5.58 Z1.4 F1725.1
G1 X-16.52 Y-5.58 Z1.4 F1725.1
G1 X-16.52 Y5.47 Z1.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z1.4 F12000
G1 X-16.52 Y5.47 Z1.4 F2235
G1 X-16.68 Y5.58 Z1.4 F2235
G1 X-17.68 Y5.58 Z1.4 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z1.4 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z1.4 F1725.1
G1 X-28.19 Y6.09 Z1.4 F1725.1
G1 X-28.19 Y-6.09 Z1.4 F1725.1
G1 X-16.01 Y-6.09 Z1.4 F1725.1
G1 X-16.01 Y5.95 Z1.4 F1725.1
G1 X-16.23 Y5.93 Z1.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z1.4 F12000
G1 X-16.23 Y5.93 Z1.4 F2235
G1 X-16.17 Y5.87 Z1.4 F2235
G1 X-16.15 Y6.09 Z1.4 F2235
G1 X-16.93 Y6.09 Z1.4 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-19.64 Y5.32 Z1.4 F12000
; extruder on
M101
G1 X-16.78 Y2.46 Z1.4 F2234.2
G1 X-16.8 Y1.99 Z1.4 F2234.2
G1 X-16.81 Y-2.73 Z1.4 F2234.2
G1 X-16.78 Y-3.2 Z1.4 F2234.2
G1 X-25.3 Y5.32 Z1.4 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-25.3 Y5.32 Z1.4 F12000
G1 X-25.3 Y5.32 Z1.4 F2235
G1 X-24.59 Y4.61 Z1.4 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-27.42 Y1.79 Z1.4 F12000
; extruder on
M101
G1 X-20.31 Y-5.32 Z1.4 F2234.2
G1 X-20.79 Y-5.29 Z1.4 F2234.2
G1 X-25.5 Y-5.3 Z1.4 F2234.2
G1 X-25.97 Y-5.32 Z1.4 F2234.2
G1 X-27.42 Y-3.87 Z1.4 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.42 Y-3.87 Z1.4 F12000
G1 X-27.42 Y-3.87 Z1.4 F2235
G1 X-26.71 Y-4.58 Z1.4 F2235
;
; Post-layer lift
G1 X-26.71 Y-4.58 Z1.85 F210
; END_LAYER_OBJECT z=1.40
; BEGIN_LAYER_OBJECT z=1.60
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z1.85 F12000
G1 X-16.68 Y5.58 Z1.6 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z1.6 F1725.1
G1 X-27.68 Y-5.58 Z1.6 F1725.1
G1 X-16.52 Y-5.58 Z1.6 F1725.1
G1 X-16.52 Y5.47 Z1.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z1.6 F12000
G1 X-16.52 Y5.47 Z1.6 F2235
G1 X-16.68 Y5.58 Z1.6 F2235
G1 X-17.68 Y5.58 Z1.6 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z1.6 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z1.6 F1725.1
G1 X-28.19 Y6.09 Z1.6 F1725.1
G1 X-28.19 Y-6.09 Z1.6 F1725.1
G1 X-16.01 Y-6.09 Z1.6 F1725.1
G1 X-16.01 Y5.95 Z1.6 F1725.1
G1 X-16.23 Y5.93 Z1.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z1.6 F12000
G1 X-16.23 Y5.93 Z1.6 F2235
G1 X-16.17 Y5.87 Z1.6 F2235
G1 X-16.15 Y6.09 Z1.6 F2235
G1 X-16.93 Y6.09 Z1.6 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y3.2 Z1.6 F12000
; extruder on
M101
G1 X-25.3 Y-5.32 Z1.6 F2234.2
G1 X-24.83 Y-5.29 Z1.6 F2234.2
G1 X-20.11 Y-5.3 Z1.6 F2234.2
G1 X-19.64 Y-5.32 Z1.6 F2234.2
G1 X-16.78 Y-2.46 Z1.6 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y-2.46 Z1.6 F12000
G1 X-16.78 Y-2.46 Z1.6 F2235
G1 X-17.49 Y-3.16 Z1.6 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-20.31 Y5.32 Z1.6 F12000
; extruder on
M101
G1 X-27.42 Y-1.79 Z1.6 F2234.2
G1 X-27.39 Y-1.31 Z1.6 F2234.2
G1 X-27.4 Y3.4 Z1.6 F2234.2
G1 X-27.42 Y3.87 Z1.6 F2234.2
G1 X-25.97 Y5.32 Z1.6 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-25.97 Y5.32 Z1.6 F12000
G1 X-25.97 Y5.32 Z1.6 F2235
G1 X-26.68 Y4.61 Z1.6 F2235
;
; Post-layer lift
G1 X-26.68 Y4.61 Z2.05 F210
; END_LAYER_OBJECT z=1.60
; BEGIN_LAYER_OBJECT z=1.80
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z2.05 F12000
G1 X-16.68 Y5.58 Z1.8 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z1.8 F1725.1
G1 X-27.68 Y-5.58 Z1.8 F1725.1
G1 X-16.52 Y-5.58 Z1.8 F1725.1
G1 X-16.52 Y5.47 Z1.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z1.8 F12000
G1 X-16.52 Y5.47 Z1.8 F2235
G1 X-16.68 Y5.58 Z1.8 F2235
G1 X-17.68 Y5.58 Z1.8 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z1.8 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z1.8 F1725.1
G1 X-28.19 Y6.09 Z1.8 F1725.1
G1 X-28.19 Y-6.09 Z1.8 F1725.1
G1 X-16.01 Y-6.09 Z1.8 F1725.1
G1 X-16.01 Y5.95 Z1.8 F1725.1
G1 X-16.23 Y5.93 Z1.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z1.8 F12000
G1 X-16.23 Y5.93 Z1.8 F2235
G1 X-16.17 Y5.87 Z1.8 F2235
G1 X-16.15 Y6.09 Z1.8 F2235
G1 X-16.93 Y6.09 Z1.8 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-19.64 Y5.32 Z1.8 F12000
; extruder on
M101
G1 X-16.78 Y2.46 Z1.8 F2234.2
G1 X-16.8 Y1.99 Z1.8 F2234.2
G1 X-16.81 Y-2.73 Z1.8 F2234.2
G1 X-16.78 Y-3.2 Z1.8 F2234.2
G1 X-25.3 Y5.32 Z1.8 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-25.3 Y5.32 Z1.8 F12000
G1 X-25.3 Y5.32 Z1.8 F2235
G1 X-24.59 Y4.61 Z1.8 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-27.42 Y1.79 Z1.8 F12000
; extruder on
M101
G1 X-20.31 Y-5.32 Z1.8 F2234.2
G1 X-20.79 Y-5.29 Z1.8 F2234.2
G1 X-25.5 Y-5.3 Z1.8 F2234.2
G1 X-25.97 Y-5.32 Z1.8 F2234.2
G1 X-27.42 Y-3.87 Z1.8 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.42 Y-3.87 Z1.8 F12000
G1 X-27.42 Y-3.87 Z1.8 F2235
G1 X-26.71 Y-4.58 Z1.8 F2235
;
; Post-layer lift
G1 X-26.71 Y-4.58 Z2.25 F210
; END_LAYER_OBJECT z=1.80
; BEGIN_LAYER_OBJECT z=2.00
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z2.25 F12000
G1 X-16.68 Y5.58 Z2 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z2 F1725.1
G1 X-27.68 Y-5.58 Z2 F1725.1
G1 X-16.52 Y-5.58 Z2 F1725.1
G1 X-16.52 Y5.47 Z2 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z2 F12000
G1 X-16.52 Y5.47 Z2 F2235
G1 X-16.68 Y5.58 Z2 F2235
G1 X-17.68 Y5.58 Z2 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z2 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z2 F1725.1
G1 X-28.19 Y6.09 Z2 F1725.1
G1 X-28.19 Y-6.09 Z2 F1725.1
G1 X-16.01 Y-6.09 Z2 F1725.1
G1 X-16.01 Y5.95 Z2 F1725.1
G1 X-16.23 Y5.93 Z2 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z2 F12000
G1 X-16.23 Y5.93 Z2 F2235
G1 X-16.17 Y5.87 Z2 F2235
G1 X-16.15 Y6.09 Z2 F2235
G1 X-16.93 Y6.09 Z2 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y3.2 Z2 F12000
; extruder on
M101
G1 X-25.3 Y-5.32 Z2 F2234.2
G1 X-24.83 Y-5.29 Z2 F2234.2
G1 X-20.11 Y-5.3 Z2 F2234.2
G1 X-19.64 Y-5.32 Z2 F2234.2
G1 X-16.78 Y-2.46 Z2 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y-2.46 Z2 F12000
G1 X-16.78 Y-2.46 Z2 F2235
G1 X-17.49 Y-3.16 Z2 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-20.31 Y5.32 Z2 F12000
; extruder on
M101
G1 X-27.42 Y-1.79 Z2 F2234.2
G1 X-27.39 Y-1.31 Z2 F2234.2
G1 X-27.4 Y3.4 Z2 F2234.2
G1 X-27.42 Y3.87 Z2 F2234.2
G1 X-25.97 Y5.32 Z2 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-25.97 Y5.32 Z2 F12000
G1 X-25.97 Y5.32 Z2 F2235
G1 X-26.68 Y4.61 Z2 F2235
;
; Post-layer lift
G1 X-26.68 Y4.61 Z2.45 F210
; END_LAYER_OBJECT z=2.00
; BEGIN_LAYER_OBJECT z=2.20
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z2.45 F12000
G1 X-16.68 Y5.58 Z2.2 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z2.2 F1725.1
G1 X-27.68 Y-5.58 Z2.2 F1725.1
G1 X-16.52 Y-5.58 Z2.2 F1725.1
G1 X-16.52 Y5.47 Z2.2 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z2.2 F12000
G1 X-16.52 Y5.47 Z2.2 F2235
G1 X-16.68 Y5.58 Z2.2 F2235
G1 X-17.68 Y5.58 Z2.2 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z2.2 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z2.2 F1725.1
G1 X-28.19 Y6.09 Z2.2 F1725.1
G1 X-28.19 Y-6.09 Z2.2 F1725.1
G1 X-16.01 Y-6.09 Z2.2 F1725.1
G1 X-16.01 Y5.95 Z2.2 F1725.1
G1 X-16.23 Y5.93 Z2.2 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z2.2 F12000
G1 X-16.23 Y5.93 Z2.2 F2235
G1 X-16.17 Y5.87 Z2.2 F2235
G1 X-16.15 Y6.09 Z2.2 F2235
G1 X-16.93 Y6.09 Z2.2 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-19.64 Y5.32 Z2.2 F12000
; extruder on
M101
G1 X-16.78 Y2.46 Z2.2 F2234.2
G1 X-16.8 Y1.99 Z2.2 F2234.2
G1 X-16.81 Y-2.73 Z2.2 F2234.2
G1 X-16.78 Y-3.2 Z2.2 F2234.2
G1 X-25.3 Y5.32 Z2.2 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-25.3 Y5.32 Z2.2 F12000
G1 X-25.3 Y5.32 Z2.2 F2235
G1 X-24.59 Y4.61 Z2.2 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-27.42 Y1.79 Z2.2 F12000
; extruder on
M101
G1 X-20.31 Y-5.32 Z2.2 F2234.2
G1 X-20.79 Y-5.29 Z2.2 F2234.2
G1 X-25.5 Y-5.3 Z2.2 F2234.2
G1 X-25.97 Y-5.32 Z2.2 F2234.2
G1 X-27.42 Y-3.87 Z2.2 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.42 Y-3.87 Z2.2 F12000
G1 X-27.42 Y-3.87 Z2.2 F2235
G1 X-26.71 Y-4.58 Z2.2 F2235
;
; Post-layer lift
G1 X-26.71 Y-4.58 Z2.65 F210
; END_LAYER_OBJECT z=2.20
; BEGIN_LAYER_OBJECT z=2.40
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z2.65 F12000
G1 X-16.68 Y5.58 Z2.4 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z2.4 F1725.1
G1 X-27.68 Y-5.58 Z2.4 F1725.1
G1 X-16.52 Y-5.58 Z2.4 F1725.1
G1 X-16.52 Y5.47 Z2.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z2.4 F12000
G1 X-16.52 Y5.47 Z2.4 F2235
G1 X-16.68 Y5.58 Z2.4 F2235
G1 X-17.68 Y5.58 Z2.4 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z2.4 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z2.4 F1725.1
G1 X-28.19 Y6.09 Z2.4 F1725.1
G1 X-28.19 Y-6.09 Z2.4 F1725.1
G1 X-16.01 Y-6.09 Z2.4 F1725.1
G1 X-16.01 Y5.95 Z2.4 F1725.1
G1 X-16.23 Y5.93 Z2.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z2.4 F12000
G1 X-16.23 Y5.93 Z2.4 F2235
G1 X-16.17 Y5.87 Z2.4 F2235
G1 X-16.15 Y6.09 Z2.4 F2235
G1 X-16.93 Y6.09 Z2.4 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y3.2 Z2.4 F12000
; extruder on
M101
G1 X-25.3 Y-5.32 Z2.4 F2234.2
G1 X-24.83 Y-5.29 Z2.4 F2234.2
G1 X-20.11 Y-5.3 Z2.4 F2234.2
G1 X-19.64 Y-5.32 Z2.4 F2234.2
G1 X-16.78 Y-2.46 Z2.4 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y-2.46 Z2.4 F12000
G1 X-16.78 Y-2.46 Z2.4 F2235
G1 X-17.49 Y-3.16 Z2.4 F2235
; extruder deciRPM
M108 S20.3
;
; 'Stacked Sparse Infill Path', 2.0 [RPM], 37.2 [head mm/s]
G1 X-20.31 Y5.32 Z2.4 F12000
; extruder on
M101
G1 X-27.42 Y-1.79 Z2.4 F2234.2
G1 X-27.39 Y-1.31 Z2.4 F2234.2
G1 X-27.4 Y3.4 Z2.4 F2234.2
G1 X-27.42 Y3.87 Z2.4 F2234.2
G1 X-25.97 Y5.32 Z2.4 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-25.97 Y5.32 Z2.4 F12000
G1 X-25.97 Y5.32 Z2.4 F2235
G1 X-26.68 Y4.61 Z2.4 F2235
;
; Post-layer lift
G1 X-26.68 Y4.61 Z2.85 F210
; END_LAYER_OBJECT z=2.40
; BEGIN_LAYER_OBJECT z=2.60
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z2.85 F12000
G1 X-16.68 Y5.58 Z2.6 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z2.6 F1725.1
G1 X-27.68 Y-5.58 Z2.6 F1725.1
G1 X-16.52 Y-5.58 Z2.6 F1725.1
G1 X-16.52 Y5.47 Z2.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z2.6 F12000
G1 X-16.52 Y5.47 Z2.6 F2235
G1 X-16.68 Y5.58 Z2.6 F2235
G1 X-17.68 Y5.58 Z2.6 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z2.6 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z2.6 F1725.1
G1 X-28.19 Y6.09 Z2.6 F1725.1
G1 X-28.19 Y-6.09 Z2.6 F1725.1
G1 X-16.01 Y-6.09 Z2.6 F1725.1
G1 X-16.01 Y5.95 Z2.6 F1725.1
G1 X-16.23 Y5.93 Z2.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z2.6 F12000
G1 X-16.23 Y5.93 Z2.6 F2235
G1 X-16.17 Y5.87 Z2.6 F2235
G1 X-16.15 Y6.09 Z2.6 F2235
G1 X-16.93 Y6.09 Z2.6 F2235
; extruder deciRPM
M108 S40.6
;
; 'Sparse Infill Path', 4.1 [RPM], 37.2 [head mm/s]
G1 X-16.81 Y5.32 Z2.6 F12000
; extruder on
M101
G1 X-16.79 Y5.3 Z2.6 F2234.2
G1 X-16.79 Y3.88 Z2.6 F2234.2
G1 X-18.22 Y5.31 Z2.6 F2234.2
G1 X-19.63 Y5.31 Z2.6 F2234.2
G1 X-16.79 Y2.47 Z2.6 F2234.2
G1 X-16.79 Y1.05 Z2.6 F2234.2
G1 X-21.05 Y5.31 Z2.6 F2234.2
G1 X-22.46 Y5.31 Z2.6 F2234.2
G1 X-16.79 Y-0.36 Z2.6 F2234.2
G1 X-16.79 Y-1.77 Z2.6 F2234.2
G1 X-23.88 Y5.31 Z2.6 F2234.2
G1 X-25.29 Y5.31 Z2.6 F2234.2
G1 X-16.79 Y-3.19 Z2.6 F2234.2
G1 X-16.79 Y-4.6 Z2.6 F2234.2
G1 X-26.71 Y5.32 Z2.6 F2234.2
G1 X-26.95 Y5.28 Z2.6 F2234.2
G1 X-27.38 Y4.85 Z2.6 F2234.2
G1 X-27.42 Y4.61 Z2.6 F2234.2
G1 X-17.5 Y-5.31 Z2.6 F2234.2
G1 X-18.91 Y-5.31 Z2.6 F2234.2
G1 X-27.41 Y3.19 Z2.6 F2234.2
G1 X-27.41 Y1.78 Z2.6 F2234.2
G1 X-20.33 Y-5.31 Z2.6 F2234.2
G1 X-21.74 Y-5.31 Z2.6 F2234.2
G1 X-27.41 Y0.36 Z2.6 F2234.2
G1 X-27.41 Y-1.05 Z2.6 F2234.2
G1 X-23.15 Y-5.31 Z2.6 F2234.2
G1 X-24.57 Y-5.31 Z2.6 F2234.2
G1 X-27.41 Y-2.47 Z2.6 F2234.2
G1 X-27.41 Y-3.88 Z2.6 F2234.2
G1 X-25.98 Y-5.31 Z2.6 F2234.2
G1 X-27.39 Y-5.31 Z2.6 F2234.2
G1 X-27.42 Y-5.29 Z2.6 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.42 Y-5.29 Z2.6 F12000
G1 X-27.42 Y-5.29 Z2.6 F2235
G1 X-27.39 Y-5.31 Z2.6 F2235
G1 X-26.43 Y-5.31 Z2.6 F2235
;
; Post-layer lift
G1 X-26.43 Y-5.31 Z3.05 F210
; END_LAYER_OBJECT z=2.60
; BEGIN_LAYER_OBJECT z=2.80
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z3.05 F12000
G1 X-16.68 Y5.58 Z2.8 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z2.8 F1725.1
G1 X-27.68 Y-5.58 Z2.8 F1725.1
G1 X-16.52 Y-5.58 Z2.8 F1725.1
G1 X-16.52 Y5.47 Z2.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z2.8 F12000
G1 X-16.52 Y5.47 Z2.8 F2235
G1 X-16.68 Y5.58 Z2.8 F2235
G1 X-17.68 Y5.58 Z2.8 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z2.8 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z2.8 F1725.1
G1 X-28.19 Y6.09 Z2.8 F1725.1
G1 X-28.19 Y-6.09 Z2.8 F1725.1
G1 X-16.01 Y-6.09 Z2.8 F1725.1
G1 X-16.01 Y5.95 Z2.8 F1725.1
G1 X-16.23 Y5.93 Z2.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z2.8 F12000
G1 X-16.23 Y5.93 Z2.8 F2235
G1 X-16.17 Y5.87 Z2.8 F2235
G1 X-16.15 Y6.09 Z2.8 F2235
G1 X-16.93 Y6.09 Z2.8 F2235
; extruder deciRPM
M108 S40.6
;
; 'Sparse Infill Path', 4.1 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y4.61 Z2.8 F12000
; extruder on
M101
G1 X-26.7 Y-5.31 Z2.8 F2234.2
G1 X-25.29 Y-5.31 Z2.8 F2234.2
G1 X-16.79 Y3.19 Z2.8 F2234.2
G1 X-16.79 Y1.78 Z2.8 F2234.2
G1 X-23.87 Y-5.31 Z2.8 F2234.2
G1 X-22.46 Y-5.31 Z2.8 F2234.2
G1 X-16.79 Y0.36 Z2.8 F2234.2
G1 X-16.79 Y-1.05 Z2.8 F2234.2
G1 X-21.05 Y-5.31 Z2.8 F2234.2
G1 X-19.63 Y-5.31 Z2.8 F2234.2
G1 X-16.79 Y-2.47 Z2.8 F2234.2
G1 X-16.79 Y-3.88 Z2.8 F2234.2
G1 X-18.22 Y-5.31 Z2.8 F2234.2
G1 X-16.81 Y-5.31 Z2.8 F2234.2
G1 X-16.78 Y-5.29 Z2.8 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.78 Y-5.29 Z2.8 F12000
G1 X-16.78 Y-5.29 Z2.8 F2235
G1 X-16.81 Y-5.31 Z2.8 F2235
G1 X-17.77 Y-5.31 Z2.8 F2235
; extruder deciRPM
M108 S40.6
;
; 'Sparse Infill Path', 4.1 [RPM], 37.2 [head mm/s]
G1 X-17.49 Y5.32 Z2.8 F12000
; extruder on
M101
G1 X-27.41 Y-4.6 Z2.8 F2234.2
G1 X-27.41 Y-3.19 Z2.8 F2234.2
G1 X-18.91 Y5.31 Z2.8 F2234.2
G1 X-20.32 Y5.31 Z2.8 F2234.2
G1 X-27.41 Y-1.77 Z2.8 F2234.2
G1 X-27.41 Y-0.36 Z2.8 F2234.2
G1 X-21.74 Y5.31 Z2.8 F2234.2
G1 X-23.15 Y5.31 Z2.8 F2234.2
G1 X-27.41 Y1.05 Z2.8 F2234.2
G1 X-27.41 Y2.47 Z2.8 F2234.2
G1 X-24.57 Y5.31 Z2.8 F2234.2
G1 X-25.98 Y5.31 Z2.8 F2234.2
G1 X-27.41 Y3.88 Z2.8 F2234.2
G1 X-27.41 Y5.29 Z2.8 F2234.2
G1 X-27.39 Y5.32 Z2.8 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.39 Y5.32 Z2.8 F12000
G1 X-27.39 Y5.32 Z2.8 F2235
G1 X-27.41 Y5.29 Z2.8 F2235
G1 X-27.41 Y4.33 Z2.8 F2235
;
; Post-layer lift
G1 X-27.41 Y4.33 Z3.25 F210
; END_LAYER_OBJECT z=2.80
; BEGIN_LAYER_OBJECT z=3.00
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z3.25 F12000
G1 X-16.68 Y5.58 Z3 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z3 F1725.1
G1 X-27.68 Y-5.58 Z3 F1725.1
G1 X-16.52 Y-5.58 Z3 F1725.1
G1 X-16.52 Y5.47 Z3 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z3 F12000
G1 X-16.52 Y5.47 Z3 F2235
G1 X-16.68 Y5.58 Z3 F2235
G1 X-17.68 Y5.58 Z3 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z3 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z3 F1725.1
G1 X-28.19 Y6.09 Z3 F1725.1
G1 X-28.19 Y-6.09 Z3 F1725.1
G1 X-16.01 Y-6.09 Z3 F1725.1
G1 X-16.01 Y5.95 Z3 F1725.1
G1 X-16.23 Y5.93 Z3 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z3 F12000
G1 X-16.23 Y5.93 Z3 F2235
G1 X-16.17 Y5.87 Z3 F2235
G1 X-16.15 Y6.09 Z3 F2235
G1 X-16.93 Y6.09 Z3 F2235
; extruder deciRPM
M108 S40.6
;
; 'Sparse Infill Path', 4.1 [RPM], 37.2 [head mm/s]
G1 X-16.81 Y5.32 Z3 F12000
; extruder on
M101
G1 X-16.79 Y5.3 Z3 F2234.2
G1 X-16.79 Y3.88 Z3 F2234.2
G1 X-18.22 Y5.31 Z3 F2234.2
G1 X-19.63 Y5.31 Z3 F2234.2
G1 X-16.79 Y2.47 Z3 F2234.2
G1 X-16.79 Y1.05 Z3 F2234.2
G1 X-21.05 Y5.31 Z3 F2234.2
G1 X-22.46 Y5.31 Z3 F2234.2
G1 X-16.79 Y-0.36 Z3 F2234.2
G1 X-16.79 Y-1.77 Z3 F2234.2
G1 X-23.88 Y5.31 Z3 F2234.2
G1 X-25.29 Y5.31 Z3 F2234.2
G1 X-16.79 Y-3.19 Z3 F2234.2
G1 X-16.79 Y-4.6 Z3 F2234.2
G1 X-26.71 Y5.32 Z3 F2234.2
G1 X-26.95 Y5.28 Z3 F2234.2
G1 X-27.38 Y4.85 Z3 F2234.2
G1 X-27.42 Y4.61 Z3 F2234.2
G1 X-17.5 Y-5.31 Z3 F2234.2
G1 X-18.91 Y-5.31 Z3 F2234.2
G1 X-27.41 Y3.19 Z3 F2234.2
G1 X-27.41 Y1.78 Z3 F2234.2
G1 X-20.33 Y-5.31 Z3 F2234.2
G1 X-21.74 Y-5.31 Z3 F2234.2
G1 X-27.41 Y0.36 Z3 F2234.2
G1 X-27.41 Y-1.05 Z3 F2234.2
G1 X-23.15 Y-5.31 Z3 F2234.2
G1 X-24.57 Y-5.31 Z3 F2234.2
G1 X-27.41 Y-2.47 Z3 F2234.2
G1 X-27.41 Y-3.88 Z3 F2234.2
G1 X-25.98 Y-5.31 Z3 F2234.2
G1 X-27.39 Y-5.31 Z3 F2234.2
G1 X-27.42 Y-5.29 Z3 F2234.2
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.42 Y-5.29 Z3 F12000
G1 X-27.42 Y-5.29 Z3 F2235
G1 X-27.39 Y-5.31 Z3 F2235
G1 X-26.43 Y-5.31 Z3 F2235
;
; Post-layer lift
G1 X-26.43 Y-5.31 Z3.45 F210
; END_LAYER_OBJECT z=3.00
; BEGIN_LAYER_OBJECT z=3.20
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z3.45 F12000
G1 X-16.68 Y5.58 Z3.2 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z3.2 F1725.1
G1 X-27.68 Y-5.58 Z3.2 F1725.1
G1 X-16.52 Y-5.58 Z3.2 F1725.1
G1 X-16.52 Y5.47 Z3.2 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z3.2 F12000
G1 X-16.52 Y5.47 Z3.2 F2235
G1 X-16.68 Y5.58 Z3.2 F2235
G1 X-17.68 Y5.58 Z3.2 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z3.2 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z3.2 F1725.1
G1 X-28.19 Y6.09 Z3.2 F1725.1
G1 X-28.19 Y-6.09 Z3.2 F1725.1
G1 X-16.01 Y-6.09 Z3.2 F1725.1
G1 X-16.01 Y5.95 Z3.2 F1725.1
G1 X-16.23 Y5.93 Z3.2 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z3.2 F12000
G1 X-16.23 Y5.93 Z3.2 F2235
G1 X-16.17 Y5.87 Z3.2 F2235
G1 X-16.15 Y6.09 Z3.2 F2235
G1 X-16.93 Y6.09 Z3.2 F2235
; extruder deciRPM
M108 S15.7
;
; 'Solid Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.87 Y-4.67 Z3.2 F12000
; extruder on
M101
G1 X-17.35 Y-5.15 Z3.2 F1725.1
G1 X-18.06 Y-5.15 Z3.2 F1725.1
G1 X-16.95 Y-4.04 Z3.2 F1725.1
G1 X-16.95 Y-3.33 Z3.2 F1725.1
G1 X-18.77 Y-5.15 Z3.2 F1725.1
G1 X-19.48 Y-5.15 Z3.2 F1725.1
G1 X-16.95 Y-2.62 Z3.2 F1725.1
G1 X-16.95 Y-1.92 Z3.2 F1725.1
G1 X-20.18 Y-5.15 Z3.2 F1725.1
G1 X-20.89 Y-5.15 Z3.2 F1725.1
G1 X-16.95 Y-1.21 Z3.2 F1725.1
G1 X-16.95 Y-0.5 Z3.2 F1725.1
G1 X-21.6 Y-5.15 Z3.2 F1725.1
G1 X-22.3 Y-5.15 Z3.2 F1725.1
G1 X-16.95 Y0.2 Z3.2 F1725.1
G1 X-16.95 Y0.91 Z3.2 F1725.1
G1 X-23.01 Y-5.15 Z3.2 F1725.1
G1 X-23.72 Y-5.15 Z3.2 F1725.1
G1 X-16.95 Y1.62 Z3.2 F1725.1
G1 X-16.95 Y2.33 Z3.2 F1725.1
G1 X-24.43 Y-5.15 Z3.2 F1725.1
G1 X-25.13 Y-5.15 Z3.2 F1725.1
G1 X-16.95 Y3.03 Z3.2 F1725.1
G1 X-16.95 Y3.74 Z3.2 F1725.1
G1 X-25.84 Y-5.15 Z3.2 F1725.1
G1 X-26.55 Y-5.15 Z3.2 F1725.1
G1 X-16.95 Y4.45 Z3.2 F1725.1
G1 X-16.95 Y5.15 Z3.2 F1725.1
G1 X-27.25 Y-5.15 Z3.2 F1725.1
G1 X-27.25 Y-4.45 Z3.2 F1725.1
G1 X-17.65 Y5.15 Z3.2 F1725.1
G1 X-18.36 Y5.15 Z3.2 F1725.1
G1 X-27.25 Y-3.74 Z3.2 F1725.1
G1 X-27.25 Y-3.03 Z3.2 F1725.1
G1 X-19.07 Y5.15 Z3.2 F1725.1
G1 X-19.77 Y5.15 Z3.2 F1725.1
G1 X-27.25 Y-2.33 Z3.2 F1725.1
G1 X-27.25 Y-1.62 Z3.2 F1725.1
G1 X-20.48 Y5.15 Z3.2 F1725.1
G1 X-21.19 Y5.15 Z3.2 F1725.1
G1 X-27.25 Y-0.91 Z3.2 F1725.1
G1 X-27.25 Y-0.2 Z3.2 F1725.1
G1 X-21.9 Y5.15 Z3.2 F1725.1
G1 X-22.6 Y5.15 Z3.2 F1725.1
G1 X-27.25 Y0.5 Z3.2 F1725.1
G1 X-27.25 Y1.21 Z3.2 F1725.1
G1 X-23.31 Y5.15 Z3.2 F1725.1
G1 X-24.02 Y5.15 Z3.2 F1725.1
G1 X-27.25 Y1.92 Z3.2 F1725.1
G1 X-27.25 Y2.62 Z3.2 F1725.1
G1 X-24.72 Y5.15 Z3.2 F1725.1
G1 X-25.43 Y5.15 Z3.2 F1725.1
G1 X-27.25 Y3.33 Z3.2 F1725.1
G1 X-27.25 Y4.04 Z3.2 F1725.1
G1 X-26.14 Y5.15 Z3.2 F1725.1
G1 X-26.85 Y5.15 Z3.2 F1725.1
G1 X-27.28 Y4.72 Z3.2 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.28 Y4.72 Z3.2 F12000
G1 X-27.28 Y4.72 Z3.2 F2235
G1 X-26.85 Y5.15 Z3.2 F2235
G1 X-26.45 Y5.15 Z3.2 F2235
;
; Post-layer lift
G1 X-26.45 Y5.15 Z3.65 F210
; END_LAYER_OBJECT z=3.20
; BEGIN_LAYER_OBJECT z=3.40
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z3.65 F12000
G1 X-16.68 Y5.58 Z3.4 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z3.4 F1725.1
G1 X-27.68 Y-5.58 Z3.4 F1725.1
G1 X-16.52 Y-5.58 Z3.4 F1725.1
G1 X-16.52 Y5.47 Z3.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z3.4 F12000
G1 X-16.52 Y5.47 Z3.4 F2235
G1 X-16.68 Y5.58 Z3.4 F2235
G1 X-17.68 Y5.58 Z3.4 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z3.4 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z3.4 F1725.1
G1 X-28.19 Y6.09 Z3.4 F1725.1
G1 X-28.19 Y-6.09 Z3.4 F1725.1
G1 X-16.01 Y-6.09 Z3.4 F1725.1
G1 X-16.01 Y5.95 Z3.4 F1725.1
G1 X-16.23 Y5.93 Z3.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z3.4 F12000
G1 X-16.23 Y5.93 Z3.4 F2235
G1 X-16.17 Y5.87 Z3.4 F2235
G1 X-16.15 Y6.09 Z3.4 F2235
G1 X-16.93 Y6.09 Z3.4 F2235
; extruder deciRPM
M108 S15.7
;
; 'Solid Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.87 Y4.67 Z3.4 F12000
; extruder on
M101
G1 X-17.35 Y5.15 Z3.4 F1725.1
G1 X-18.06 Y5.15 Z3.4 F1725.1
G1 X-16.95 Y4.04 Z3.4 F1725.1
G1 X-16.95 Y3.33 Z3.4 F1725.1
G1 X-18.77 Y5.15 Z3.4 F1725.1
G1 X-19.48 Y5.15 Z3.4 F1725.1
G1 X-16.95 Y2.62 Z3.4 F1725.1
G1 X-16.95 Y1.92 Z3.4 F1725.1
G1 X-20.18 Y5.15 Z3.4 F1725.1
G1 X-20.89 Y5.15 Z3.4 F1725.1
G1 X-16.95 Y1.21 Z3.4 F1725.1
G1 X-16.95 Y0.5 Z3.4 F1725.1
G1 X-21.6 Y5.15 Z3.4 F1725.1
G1 X-22.3 Y5.15 Z3.4 F1725.1
G1 X-16.95 Y-0.2 Z3.4 F1725.1
G1 X-16.95 Y-0.91 Z3.4 F1725.1
G1 X-23.01 Y5.15 Z3.4 F1725.1
G1 X-23.72 Y5.15 Z3.4 F1725.1
G1 X-16.95 Y-1.62 Z3.4 F1725.1
G1 X-16.95 Y-2.33 Z3.4 F1725.1
G1 X-24.43 Y5.15 Z3.4 F1725.1
G1 X-25.13 Y5.15 Z3.4 F1725.1
G1 X-16.95 Y-3.03 Z3.4 F1725.1
G1 X-16.95 Y-3.74 Z3.4 F1725.1
G1 X-25.84 Y5.15 Z3.4 F1725.1
G1 X-26.55 Y5.15 Z3.4 F1725.1
G1 X-16.95 Y-4.45 Z3.4 F1725.1
G1 X-16.95 Y-5.15 Z3.4 F1725.1
G1 X-27.25 Y5.15 Z3.4 F1725.1
G1 X-27.25 Y4.45 Z3.4 F1725.1
G1 X-17.65 Y-5.15 Z3.4 F1725.1
G1 X-18.36 Y-5.15 Z3.4 F1725.1
G1 X-27.25 Y3.74 Z3.4 F1725.1
G1 X-27.25 Y3.03 Z3.4 F1725.1
G1 X-19.07 Y-5.15 Z3.4 F1725.1
G1 X-19.77 Y-5.15 Z3.4 F1725.1
G1 X-27.25 Y2.33 Z3.4 F1725.1
G1 X-27.25 Y1.62 Z3.4 F1725.1
G1 X-20.48 Y-5.15 Z3.4 F1725.1
G1 X-21.19 Y-5.15 Z3.4 F1725.1
G1 X-27.25 Y0.91 Z3.4 F1725.1
G1 X-27.25 Y0.2 Z3.4 F1725.1
G1 X-21.9 Y-5.15 Z3.4 F1725.1
G1 X-22.6 Y-5.15 Z3.4 F1725.1
G1 X-27.25 Y-0.5 Z3.4 F1725.1
G1 X-27.25 Y-1.21 Z3.4 F1725.1
G1 X-23.31 Y-5.15 Z3.4 F1725.1
G1 X-24.02 Y-5.15 Z3.4 F1725.1
G1 X-27.25 Y-1.92 Z3.4 F1725.1
G1 X-27.25 Y-2.62 Z3.4 F1725.1
G1 X-24.72 Y-5.15 Z3.4 F1725.1
G1 X-25.43 Y-5.15 Z3.4 F1725.1
G1 X-27.25 Y-3.33 Z3.4 F1725.1
G1 X-27.25 Y-4.04 Z3.4 F1725.1
G1 X-26.14 Y-5.15 Z3.4 F1725.1
G1 X-26.85 Y-5.15 Z3.4 F1725.1
G1 X-27.28 Y-4.72 Z3.4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.28 Y-4.72 Z3.4 F12000
G1 X-27.28 Y-4.72 Z3.4 F2235
G1 X-26.85 Y-5.15 Z3.4 F2235
G1 X-26.45 Y-5.15 Z3.4 F2235
;
; Post-layer lift
G1 X-26.45 Y-5.15 Z3.85 F210
; END_LAYER_OBJECT z=3.40
; BEGIN_LAYER_OBJECT z=3.60
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z3.85 F12000
G1 X-16.68 Y5.58 Z3.6 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z3.6 F1725.1
G1 X-27.68 Y-5.58 Z3.6 F1725.1
G1 X-16.52 Y-5.58 Z3.6 F1725.1
G1 X-16.52 Y5.47 Z3.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z3.6 F12000
G1 X-16.52 Y5.47 Z3.6 F2235
G1 X-16.68 Y5.58 Z3.6 F2235
G1 X-17.68 Y5.58 Z3.6 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z3.6 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z3.6 F1725.1
G1 X-28.19 Y6.09 Z3.6 F1725.1
G1 X-28.19 Y-6.09 Z3.6 F1725.1
G1 X-16.01 Y-6.09 Z3.6 F1725.1
G1 X-16.01 Y5.95 Z3.6 F1725.1
G1 X-16.23 Y5.93 Z3.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z3.6 F12000
G1 X-16.23 Y5.93 Z3.6 F2235
G1 X-16.17 Y5.87 Z3.6 F2235
G1 X-16.15 Y6.09 Z3.6 F2235
G1 X-16.93 Y6.09 Z3.6 F2235
; extruder deciRPM
M108 S15.7
;
; 'Solid Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.87 Y-4.67 Z3.6 F12000
; extruder on
M101
G1 X-17.35 Y-5.15 Z3.6 F1725.1
G1 X-18.06 Y-5.15 Z3.6 F1725.1
G1 X-16.95 Y-4.04 Z3.6 F1725.1
G1 X-16.95 Y-3.33 Z3.6 F1725.1
G1 X-18.77 Y-5.15 Z3.6 F1725.1
G1 X-19.48 Y-5.15 Z3.6 F1725.1
G1 X-16.95 Y-2.62 Z3.6 F1725.1
G1 X-16.95 Y-1.92 Z3.6 F1725.1
G1 X-20.18 Y-5.15 Z3.6 F1725.1
G1 X-20.89 Y-5.15 Z3.6 F1725.1
G1 X-16.95 Y-1.21 Z3.6 F1725.1
G1 X-16.95 Y-0.5 Z3.6 F1725.1
G1 X-21.6 Y-5.15 Z3.6 F1725.1
G1 X-22.3 Y-5.15 Z3.6 F1725.1
G1 X-16.95 Y0.2 Z3.6 F1725.1
G1 X-16.95 Y0.91 Z3.6 F1725.1
G1 X-23.01 Y-5.15 Z3.6 F1725.1
G1 X-23.72 Y-5.15 Z3.6 F1725.1
G1 X-16.95 Y1.62 Z3.6 F1725.1
G1 X-16.95 Y2.33 Z3.6 F1725.1
G1 X-24.43 Y-5.15 Z3.6 F1725.1
G1 X-25.13 Y-5.15 Z3.6 F1725.1
G1 X-16.95 Y3.03 Z3.6 F1725.1
G1 X-16.95 Y3.74 Z3.6 F1725.1
G1 X-25.84 Y-5.15 Z3.6 F1725.1
G1 X-26.55 Y-5.15 Z3.6 F1725.1
G1 X-16.95 Y4.45 Z3.6 F1725.1
G1 X-16.95 Y5.15 Z3.6 F1725.1
G1 X-27.25 Y-5.15 Z3.6 F1725.1
G1 X-27.25 Y-4.45 Z3.6 F1725.1
G1 X-17.65 Y5.15 Z3.6 F1725.1
G1 X-18.36 Y5.15 Z3.6 F1725.1
G1 X-27.25 Y-3.74 Z3.6 F1725.1
G1 X-27.25 Y-3.03 Z3.6 F1725.1
G1 X-19.07 Y5.15 Z3.6 F1725.1
G1 X-19.77 Y5.15 Z3.6 F1725.1
G1 X-27.25 Y-2.33 Z3.6 F1725.1
G1 X-27.25 Y-1.62 Z3.6 F1725.1
G1 X-20.48 Y5.15 Z3.6 F1725.1
G1 X-21.19 Y5.15 Z3.6 F1725.1
G1 X-27.25 Y-0.91 Z3.6 F1725.1
G1 X-27.25 Y-0.2 Z3.6 F1725.1
G1 X-21.9 Y5.15 Z3.6 F1725.1
G1 X-22.6 Y5.15 Z3.6 F1725.1
G1 X-27.25 Y0.5 Z3.6 F1725.1
G1 X-27.25 Y1.21 Z3.6 F1725.1
G1 X-23.31 Y5.15 Z3.6 F1725.1
G1 X-24.02 Y5.15 Z3.6 F1725.1
G1 X-27.25 Y1.92 Z3.6 F1725.1
G1 X-27.25 Y2.62 Z3.6 F1725.1
G1 X-24.72 Y5.15 Z3.6 F1725.1
G1 X-25.43 Y5.15 Z3.6 F1725.1
G1 X-27.25 Y3.33 Z3.6 F1725.1
G1 X-27.25 Y4.04 Z3.6 F1725.1
G1 X-26.14 Y5.15 Z3.6 F1725.1
G1 X-26.85 Y5.15 Z3.6 F1725.1
G1 X-27.28 Y4.72 Z3.6 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.28 Y4.72 Z3.6 F12000
G1 X-27.28 Y4.72 Z3.6 F2235
G1 X-26.85 Y5.15 Z3.6 F2235
G1 X-26.45 Y5.15 Z3.6 F2235
;
; Post-layer lift
G1 X-26.45 Y5.15 Z4.05 F210
; END_LAYER_OBJECT z=3.60
; BEGIN_LAYER_OBJECT z=3.80
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z4.05 F12000
G1 X-16.68 Y5.58 Z3.8 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z3.8 F1725.1
G1 X-27.68 Y-5.58 Z3.8 F1725.1
G1 X-16.52 Y-5.58 Z3.8 F1725.1
G1 X-16.52 Y5.47 Z3.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z3.8 F12000
G1 X-16.52 Y5.47 Z3.8 F2235
G1 X-16.68 Y5.58 Z3.8 F2235
G1 X-17.68 Y5.58 Z3.8 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z3.8 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z3.8 F1725.1
G1 X-28.19 Y6.09 Z3.8 F1725.1
G1 X-28.19 Y-6.09 Z3.8 F1725.1
G1 X-16.01 Y-6.09 Z3.8 F1725.1
G1 X-16.01 Y5.95 Z3.8 F1725.1
G1 X-16.23 Y5.93 Z3.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z3.8 F12000
G1 X-16.23 Y5.93 Z3.8 F2235
G1 X-16.17 Y5.87 Z3.8 F2235
G1 X-16.15 Y6.09 Z3.8 F2235
G1 X-16.93 Y6.09 Z3.8 F2235
; extruder deciRPM
M108 S15.7
;
; 'Solid Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.87 Y4.67 Z3.8 F12000
; extruder on
M101
G1 X-17.35 Y5.15 Z3.8 F1725.1
G1 X-18.06 Y5.15 Z3.8 F1725.1
G1 X-16.95 Y4.04 Z3.8 F1725.1
G1 X-16.95 Y3.33 Z3.8 F1725.1
G1 X-18.77 Y5.15 Z3.8 F1725.1
G1 X-19.48 Y5.15 Z3.8 F1725.1
G1 X-16.95 Y2.62 Z3.8 F1725.1
G1 X-16.95 Y1.92 Z3.8 F1725.1
G1 X-20.18 Y5.15 Z3.8 F1725.1
G1 X-20.89 Y5.15 Z3.8 F1725.1
G1 X-16.95 Y1.21 Z3.8 F1725.1
G1 X-16.95 Y0.5 Z3.8 F1725.1
G1 X-21.6 Y5.15 Z3.8 F1725.1
G1 X-22.3 Y5.15 Z3.8 F1725.1
G1 X-16.95 Y-0.2 Z3.8 F1725.1
G1 X-16.95 Y-0.91 Z3.8 F1725.1
G1 X-23.01 Y5.15 Z3.8 F1725.1
G1 X-23.72 Y5.15 Z3.8 F1725.1
G1 X-16.95 Y-1.62 Z3.8 F1725.1
G1 X-16.95 Y-2.33 Z3.8 F1725.1
G1 X-24.43 Y5.15 Z3.8 F1725.1
G1 X-25.13 Y5.15 Z3.8 F1725.1
G1 X-16.95 Y-3.03 Z3.8 F1725.1
G1 X-16.95 Y-3.74 Z3.8 F1725.1
G1 X-25.84 Y5.15 Z3.8 F1725.1
G1 X-26.55 Y5.15 Z3.8 F1725.1
G1 X-16.95 Y-4.45 Z3.8 F1725.1
G1 X-16.95 Y-5.15 Z3.8 F1725.1
G1 X-27.25 Y5.15 Z3.8 F1725.1
G1 X-27.25 Y4.45 Z3.8 F1725.1
G1 X-17.65 Y-5.15 Z3.8 F1725.1
G1 X-18.36 Y-5.15 Z3.8 F1725.1
G1 X-27.25 Y3.74 Z3.8 F1725.1
G1 X-27.25 Y3.03 Z3.8 F1725.1
G1 X-19.07 Y-5.15 Z3.8 F1725.1
G1 X-19.77 Y-5.15 Z3.8 F1725.1
G1 X-27.25 Y2.33 Z3.8 F1725.1
G1 X-27.25 Y1.62 Z3.8 F1725.1
G1 X-20.48 Y-5.15 Z3.8 F1725.1
G1 X-21.19 Y-5.15 Z3.8 F1725.1
G1 X-27.25 Y0.91 Z3.8 F1725.1
G1 X-27.25 Y0.2 Z3.8 F1725.1
G1 X-21.9 Y-5.15 Z3.8 F1725.1
G1 X-22.6 Y-5.15 Z3.8 F1725.1
G1 X-27.25 Y-0.5 Z3.8 F1725.1
G1 X-27.25 Y-1.21 Z3.8 F1725.1
G1 X-23.31 Y-5.15 Z3.8 F1725.1
G1 X-24.02 Y-5.15 Z3.8 F1725.1
G1 X-27.25 Y-1.92 Z3.8 F1725.1
G1 X-27.25 Y-2.62 Z3.8 F1725.1
G1 X-24.72 Y-5.15 Z3.8 F1725.1
G1 X-25.43 Y-5.15 Z3.8 F1725.1
G1 X-27.25 Y-3.33 Z3.8 F1725.1
G1 X-27.25 Y-4.04 Z3.8 F1725.1
G1 X-26.14 Y-5.15 Z3.8 F1725.1
G1 X-26.85 Y-5.15 Z3.8 F1725.1
G1 X-27.28 Y-4.72 Z3.8 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.28 Y-4.72 Z3.8 F12000
G1 X-27.28 Y-4.72 Z3.8 F2235
G1 X-26.85 Y-5.15 Z3.8 F2235
G1 X-26.45 Y-5.15 Z3.8 F2235
;
; Post-layer lift
G1 X-26.45 Y-5.15 Z4.25 F210
; END_LAYER_OBJECT z=3.80
; BEGIN_LAYER_OBJECT z=4.00
; extruder deciRPM
M108 S15.7
;
; 'Loop Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.68 Y5.58 Z4.25 F12000
G1 X-16.68 Y5.58 Z4 F210
; extruder on
M101
G1 X-27.68 Y5.58 Z4 F1725.1
G1 X-27.68 Y-5.58 Z4 F1725.1
G1 X-16.52 Y-5.58 Z4 F1725.1
G1 X-16.52 Y5.47 Z4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.52 Y5.47 Z4 F12000
G1 X-16.52 Y5.47 Z4 F2235
G1 X-16.68 Y5.58 Z4 F2235
G1 X-17.68 Y5.58 Z4 F2235
; extruder deciRPM
M108 S15.7
;
; 'Perimeter Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.17 Y5.87 Z4 F12000
; extruder on
M101
G1 X-16.15 Y6.09 Z4 F1725.1
G1 X-28.19 Y6.09 Z4 F1725.1
G1 X-28.19 Y-6.09 Z4 F1725.1
G1 X-16.01 Y-6.09 Z4 F1725.1
G1 X-16.01 Y5.95 Z4 F1725.1
G1 X-16.23 Y5.93 Z4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-16.23 Y5.93 Z4 F12000
G1 X-16.23 Y5.93 Z4 F2235
G1 X-16.17 Y5.87 Z4 F2235
G1 X-16.15 Y6.09 Z4 F2235
G1 X-16.93 Y6.09 Z4 F2235
; extruder deciRPM
M108 S15.7
;
; 'Solid Path', 1.6 [RPM], 28.8 [head mm/s]
G1 X-16.87 Y-4.67 Z4 F12000
; extruder on
M101
G1 X-17.35 Y-5.15 Z4 F1725.1
G1 X-18.06 Y-5.15 Z4 F1725.1
G1 X-16.95 Y-4.04 Z4 F1725.1
G1 X-16.95 Y-3.33 Z4 F1725.1
G1 X-18.77 Y-5.15 Z4 F1725.1
G1 X-19.47 Y-5.15 Z4 F1725.1
G1 X-16.95 Y-2.63 Z4 F1725.1
G1 X-16.95 Y-1.92 Z4 F1725.1
G1 X-20.18 Y-5.15 Z4 F1725.1
G1 X-20.89 Y-5.15 Z4 F1725.1
G1 X-16.95 Y-1.21 Z4 F1725.1
G1 X-16.95 Y-0.5 Z4 F1725.1
G1 X-21.6 Y-5.15 Z4 F1725.1
G1 X-22.3 Y-5.15 Z4 F1725.1
G1 X-16.95 Y0.2 Z4 F1725.1
G1 X-16.95 Y0.91 Z4 F1725.1
G1 X-23.01 Y-5.15 Z4 F1725.1
G1 X-23.72 Y-5.15 Z4 F1725.1
G1 X-16.95 Y1.62 Z4 F1725.1
G1 X-16.95 Y2.32 Z4 F1725.1
G1 X-24.42 Y-5.15 Z4 F1725.1
G1 X-25.13 Y-5.15 Z4 F1725.1
G1 X-16.95 Y3.03 Z4 F1725.1
G1 X-16.95 Y3.74 Z4 F1725.1
G1 X-25.84 Y-5.15 Z4 F1725.1
G1 X-26.55 Y-5.15 Z4 F1725.1
G1 X-16.95 Y4.45 Z4 F1725.1
G1 X-16.95 Y5.15 Z4 F1725.1
G1 X-27.25 Y-5.15 Z4 F1725.1
G1 X-27.25 Y-4.45 Z4 F1725.1
G1 X-17.65 Y5.15 Z4 F1725.1
G1 X-18.36 Y5.15 Z4 F1725.1
G1 X-27.25 Y-3.74 Z4 F1725.1
G1 X-27.25 Y-3.03 Z4 F1725.1
G1 X-19.07 Y5.15 Z4 F1725.1
G1 X-19.78 Y5.15 Z4 F1725.1
G1 X-27.25 Y-2.32 Z4 F1725.1
G1 X-27.25 Y-1.62 Z4 F1725.1
G1 X-20.48 Y5.15 Z4 F1725.1
G1 X-21.19 Y5.15 Z4 F1725.1
G1 X-27.25 Y-0.91 Z4 F1725.1
G1 X-27.25 Y-0.2 Z4 F1725.1
G1 X-21.9 Y5.15 Z4 F1725.1
G1 X-22.6 Y5.15 Z4 F1725.1
G1 X-27.25 Y0.5 Z4 F1725.1
G1 X-27.25 Y1.21 Z4 F1725.1
G1 X-23.31 Y5.15 Z4 F1725.1
G1 X-24.02 Y5.15 Z4 F1725.1
G1 X-27.25 Y1.92 Z4 F1725.1
G1 X-27.25 Y2.63 Z4 F1725.1
G1 X-24.73 Y5.15 Z4 F1725.1
G1 X-25.43 Y5.15 Z4 F1725.1
G1 X-27.25 Y3.33 Z4 F1725.1
G1 X-27.25 Y4.04 Z4 F1725.1
G1 X-26.14 Y5.15 Z4 F1725.1
G1 X-26.85 Y5.15 Z4 F1725.1
G1 X-27.27 Y4.73 Z4 F1725.1
; extruder(s) off
M103
;
; 'Destring/Wipe/Jump Path', 0.0 [RPM], 37.2 [head mm/s]
G1 X-27.27 Y4.73 Z4 F12000
G1 X-27.27 Y4.73 Z4 F2235
G1 X-26.85 Y5.15 Z4 F2235
G1 X-26.45 Y5.15 Z4 F2235
;
; Post-layer lift
G1 X-26.45 Y5.15 Z4.65 F210
; END_LAYER_OBJECT z=4.00
;
; *** Cooling Extruder 1 to 0 C ***
; Guaranteed same extruder, cooling down
; BfB-style
M104 S0
;
; fan off
M107
; *** G-code Postfix ***
;
M103
M104 S0
M204 S0
M304 S0

;
;
;
; Estimated Build Time:   6.59 minutes
; Estimated Build Volume: 0.527 cm^3
; Estimated Build Cost:   $0.01
;
; *** Extrusion Time Breakdown ***
; * estimated time in [s]
; * before possibly slowing down for 'cool'
; * not including Z-travel
;	+-------------+-------------+-------------+-------------+----------------------------+
;	| Extruder #1 | Extruder #2 | Extruder #3 | Extruder #4 | Path Type                  |
;	+-------------+-------------+-------------+-------------+----------------------------+
;	| 4.29894     | 0           | 0           | 0           | Jump Path                  |
;	| 0           | 0           | 0           | 0           | Pillar Path                |
;	| 0           | 0           | 0           | 0           | Raft Path                  |
;	| 0           > 0           > 0           > 0           > Support Interface Path     |
;	| 0           | 0           | 0           | 0           | Support (may Stack) Path   |
;	| 37.7238     | 0           | 0           | 0           | Perimeter Path             |
;	| 33.8008     | 0           | 0           | 0           | Loop Path                  |
;	| 98.827      > 0           > 0           > 0           > Solid Path                 |
;	| 12.9681     | 0           | 0           | 0           | Sparse Infill Path         |
;	| 8.47069     | 0           | 0           | 0           | Stacked Sparse Infill Path |
;	| 5.03184     | 0           | 0           | 0           | Destring/Wipe/Jump Path    |
;	| 0           > 0           > 0           > 0           > Crown Path                 |
;	| 0           | 0           | 0           | 0           | Prime Pillar Path          |
;	| 0           | 0           | 0           | 0           | Skirt Path                 |
;	| 0           | 0           | 0           | 0           | Pause Point                |
;	| 190.125     > 0           > 0           > 0           > Extruder Warm-Up           |
;	+-------------+-------------+-------------+-------------+----------------------------+
; Total estimated (pre-cool) minutes: 6.52