The preview screen currently includes build statistics including build time. However, while a print is running, to see time remaining you have to swap to the machine control panel which is not ideal as it then covers a large part of the preview screen. Is it possible to add the 'Time remaining' info...
I have what was originally a Leapfrog creatr but it's been heavily modified over the years. The build volume has been set to X;230, Y;260 and Z;200mm. I now want to increase Z so the table drops 202mm from the home position. I have changed it in the G-Code machine settings but it doesn't physically ...
I just changed the laptop connected to my Leapfrog Creatr customised printer. Previously worked pretty well but on this laptop I just can't get the live preview to work. I usually set the update interval to 0.1s but even with the default 5s it doesn't do much. Am I missing something? Simplify3D vers...
I've looked but not found if it is possible to define infill differently for different parts of a model. I have a component where the infil can be quite low to speed up printing but in certain areas higher density is needed for strength. My example is a solid cube but with various projecting bosses....
I have a relatively complex engineering part I wish to print partly solid without infill. The parts I want solid are only 2 or 3mm thick but there are many bumps and projections and a few much thicker parts which can and probably should be partly hollow. Is it possible to define that infill is only ...