Simplify3D User Forum

Markos2f

Many thanks for sharing your configurations. My original challenge was to avoid filament Jam occurring early in printing job. I overcome this by setting the multiplier to 0.5. The resultant printed model showed poor adhesion between layers which I could then crumble in my hands under slight pressure...

Markos2f

Hi All I am now trying out the new Lulzbot Micro SL extruder that has 0.25mm nozzle with 3mm ABS. I originally thought that by simply changing the nozzle diameter the corresponding flow rate calculated by Simplify3d would do the trick. Sadly 20 Jams later this is not the case. After reading several ...

Markos2f

One of the main causes of a 3D printer jam is exceeding your 3D printer's feed rate. Most 3D printers cannot print ABS faster than about 13.50mm³/s using a 0.40mm nozzle. Filament manufacturers should tell you this. But instead they give mm/s speed recommendations, which is nearly useless. If your ...

Markos2f

Hi All I would like to upgrade my Flashforge CreatorPro firmware to the latest sailfish. I'm seeing several methods to achieve but I don'twant to do it the hard way. If I can use Simplify3d by itself to achieve then great please illustrate as Simplify3d only accepts .frm file type for the firmware. ...

Markos2f

Hi All, When I import my stl file it shows a clean object on all sides, when I do a print preview it shows a set pattern on the first (bottom) layer and when I print thats exactly what I get which is consistent but I want the first layer smooth. I'm attaching the project file for assistance.. Thanx

Markos2f

Hi All, I have been using S3d ver 3.02 and it was working beautifully now all of a sudden it crashes everytime I goto Configuration assistant. I uninstalled and reinstalled but I think there is some configuraion setting saved that I need to remove to to see if that solves the issue. Please help. 'm ...

Search found 6 matches

Re: Extruder FLow Rate

Extruder FLow Rate

Re: Default Feed Rate and Maximum Feed Rate

Howto upgrade Falshforge Creator Pro Sailfish firmware

Bottom layer not smooth

Configuration Assistant