Simplify3D User Forum

Frguy

look this topic, perhaps is it the same problem
viewtopic.php?f=9&t=3630

Frguy

There is a bug in the retractation filament distance. The gcode uses the value of "Tool change retraction distance" (Advanced), instead of "Retraction distance" (Extrude). For printing with 1 material this 2 values must be same, but for printing with 2 materials, the "Tool c...

Frguy

I have approximately the same problem Sometimes bad layers appears (already present in 2.0.1 v). The bug disappears by slightly modifying the height of the first layer (or all layers). I think to a calculation problem when the layer has a critical height /certain forms. Here are two examples of the ...

Frguy

G1 X25.651 Y19.73 E0.1992 => Print from the current (X, Y) point to the point X25.651 Y19.73. Extruding material as the move happens from the current extruded length to a length of 0.1992mm G1 E-0.5 F1800 =>Wire retraction of 0.5 mm (to avoid drooling). Speed 1800 mm/mn G0 X23.08 Y18.397 F4800 => Ra...

Frguy

After reading test, I do not think the problem is the Gcode but the machine, because it has lost its origins « the Y axis origin had moved 4.7mm » (and just in one direction). With a gcode problem, the printer follows the incorrect movements but always know where it is, and origins are the same at t...

Frguy

It seems that this is actually with complex models I made the following tests on an iMac and a MacBook Pro Retina (Mac OS 10.9.2) so you can test. I chose at random two profiles of different machines on which I changed only the start point (Use random start points for all perimeters) Test 1: profile...

Frguy

I have the same problem on my Mac (Mavericks os).
S3D crashing with lots of SLT files with option "Use random start points all perimeters".

Search found 7 matches

Re: Slowdowns=blobs

Bug with retraction distance

Re: Possible slicing bug?

Re: Major bug, x-axis leaning to the right (positive)

Re: Major bug, x-axis leaning to the right (positive)

Re: If Simplify 3D version 2.1.0 is CRASHING when you "Prepa

Re: If Simplify 3D version 2.1.0 is CRASHING when you "Prepa