Simplify3D User Forum

KTMDirtFace

Thanks I have no idea why that didn't work before but it works now thanks!

KTMDirtFace

Script I wrote above worked great.

Only thing I wish is if I could get the temperatures for the nozzle and bed in a variable instead of having to set them in the start script ?

KTMDirtFace

Ok I think this will work thank you very much. I'll just have to remember to modify my temps in the startup script as opposed to the temperature tab? This works I used to have some G28 codes in there until I noticed if you G28 after do ing the auto level it blows all auto level settings away..this w...

KTMDirtFace

This is what a Code of one of my files is near the start. I looked at g-code wiki and i see M140 = set bed temp M190 = wait for bed temp M104 = set extruder temp M109 = set extruder temp and wait should I use S80 and S230 TO instead of bed0_temperature and extruder0_temperature? I'm not sure what S8...

KTMDirtFace

replace your start script with this: G28 ; home all axes G1 Z5 F5000 ; lift Z by 5mm M565 Z-0.8 ; set the offset for auto-leveling mechanism G29 ; run auto-level M140 S[bed0_temperature] M190 S[bed0_temperature] M104 S[extruder0_temperature] M109 S[extruder0_temperature] Thanks and I assume also un...

KTMDirtFace

I have a robo3d R1 with auto level. I just got BuildTak print base to put on the build plate, running the auto level with a hot nozzle will mess it up. Is there a way to have it Run auto level script. THEN wait for build platform and nozzle to heat up. Then print? The auto level script looks like th...

KTMDirtFace

Its definitely worth it. It has a TON of features though so it can get confusing. I wont even touch my other software after buying this. I like how they have pre-sets for just about every printer.

They have good support too ( actual support not this user forum )

KTMDirtFace

I have a robo R1 with autolevel. I'm trying to set it up with simplify3d like this post here. http://community.robo3d.com/index.php?threads/read-me-my-robo-doesnt-auto-level-correctly-faq.4664/ When I change the Z-Offset in the options window ( sorry I can't remember the tab that option is in ). I'm...

KTMDirtFace

-155 worked perfectly thank you.

KTMDirtFace

Thank you! That should fix me up thanks.

No those are not holes they are rare earth magnets that are glued to the glass it holds the glass onto the build platform. the glass is cradled in to the metal part.

Search found 15 matches

Re: Run AutoLevel while cold.

Re: Run AutoLevel while cold.

Re: Run AutoLevel while cold.

Re: Run AutoLevel while cold.

Re: Run AutoLevel while cold.

Run AutoLevel while cold.

Re: Is it worth it?

Robo R1 - AutoLevel Z-Offset questions

Re: huge blob at start..nozzle wipe?

Re: huge blob at start..nozzle wipe?