Simplify3D User Forum

percar

I have had this issue. My solution was to dry out the filament. Even though PETG does not absorb moister the same way nylon or abs does, it will. After drying most of the problems go away and you get a smooth print. Also make sure that you are running high enough heat on the hot-end. When i print wi...

percar

Why not use 100% infill this is like making it solide

percar

Thanks for the update. I know you cant give an exact timeline for the release but could you give a hint as to the timeline that you are working towards

percar

Chris Chris come on its now time to address the questions that you customers have. If you don't have a viable upgrade yet it is not failure to admit that you need more time. Just explain and keep us informed. No one is going to jump down your throat because your programming efforts are not going as ...

percar

As for Fusion not being able to work with a delta printer that is not so. All you have to do is the configuration of the post processer. At the end of the day gcode is still only x, y, z plus extruder the rest of the calculations are done in the controller and firmware

percar

Ok so it has been quite some time since we have hear anything regarding version 5. I know when coding the final touches take the longest as well as the debugging. I'm not sure of all the new features that are going to be implemented into version 5 but likely there will be some good enhancements. Chr...

percar

for an extruder that doesn't slip on higher speeds I recommend http://www.bondtech.se their extruder drives are rock solid. I have been using their extruder drive for over 2 yrs no problems with slippage anymore.

percar

you can also use export but set up the options to mm dimensions

percar

I just purchased this software
I have a custom built printer dual extruder 12 " X 24" X 12" build area
Aluminum heated bed (using mains for power with separate temperature controller.

percar

I just purchased simplify 3d and am using it on a printer 610mm x 305mm x 275 mm running an azteeg x3 controller with dual extruder I have a fairly large model that I want to print I attempted to work with 2 profiles because I wanted both a brim, and a skirt to retain the heat The first profile woul...

Search found 10 matches

Re: PETG on Ender 3 Printing issue

Re: Making objects as solid as possible

Re: Version 5 Announcement

Re: Paid upgrade For 2020 upcoming Version 5.0

Re: Paid upgrade For 2020 upcoming Version 5.0

Re: Paid upgrade For 2019 upcoming Version 5.0

Re: extruder recommendation?

Re: Scaling issue Autodesk Inventor STL to Simplify 3-D

Re: How many of you are using S3D with a custom built printe

how to get both a Skirt and brim