Simplify3D User Forum

lkeppner

I have also noted that updates are usually 2 - 3 months apart. However we are now 4 months and counting... I am hoping that the Team is working on the items we are all waiting for such as dual extrusion help like purge towers / wipe walls / etc. But it would still be nice to get some idea when we mi...

lkeppner

KW, thank you... I will give it a try. I will have to see if 35.5 is the right number because there is obviously already an offset in the firmware because I only had to offset it by -5.5 mm to get it working but thank you for the proper M-code.

lkeppner

I just received my Zinter Pro and have been working for a few days with a single extrusion print. I have now started trying to work with both nozzles for a dual extrusion and I have an offset that doesn't seem to be handled in firmware properly. Had anybody else worked with this printer yet? And I c...

lkeppner

You're assuming that the only reason parts fall over is because we have "hit" them with the nozzle. There are times that parts "fall over" just because they are not adhered properly to the glass and the drag from normal printing will pull them off the bed. So, while increasing yo...

lkeppner

You didn't specify which printer you have so I don't know if this is relevant, but I have experienced a similar "looking" effect on my 2 nozzle printer when they are not adjusted. This happens when the lower of the nozzles rides along and is touching the surface just printed by the "o...

lkeppner

I believe if you click on the machine control panel while printing, the progress bar at the bottom gives the remaining time in minutes. That's why I leave it open over the printing preview screen so I can monitor how long is left.

lkeppner

Sorry for the delay in response... The "goopy" material is all about speed... Spend too long in one spot without proper cooling. This can be from two different problems. One is when you print too fast on small layers so you are laying molten material on top of molten material... In this ca...

lkeppner

Joe, The problem here is not as straight forward as just "pausing the print, physically removing a defective/corrupt model from the build plate, and continuing the print". The difficulty in the request is to then remove all gcode that pertains to the REMOVED object so that anything else on...

lkeppner

I also understand the complexity of "removing a model mid print". However, I agree how valuable this would be. I also would print multiple objects more often if it wasn't for the fear of one of them getting corrupted or, just not printing the way I would desire. The ability to pause a job,...

lkeppner

Agreed that this would be a great feature that would get a LOT of use!!

Search found 27 matches

Re: when is the next update?

Re: Zinter Pro nozzle offset

Zinter Pro nozzle offset

Re: Ignore gcode for a part that falls over mid-print.

Re: Blurring or echoing of surface features

Re: Remaining time to end print

Re: airwolf3d HD2x

Re: Ability to Pause a Print Job, Remove a model and then Co

Re: Ability to Pause a Print Job, Remove a model and then Co

Re: Reload Part