Simplify3D User Forum

JoelM

Thanks for the reply David. I am concerned about the multiplier being so low. I'll be starting over from scratch when I have a chance. I feel like I must have done something wrong at some point. The blobs seem to happen when the extruder moves to the outer perimeter, almost like it overshoots it's t...

JoelM

Sorry for not being to clear. It is at the beginning of the perimeter but the inner perimeter looks fine. Just the outer start gets a blob. I drew up an illustration showing what's happening.

JoelM

Thanks for the reply Joe. I normally print at 190 C so I did another test print at 190 with coasting set to .2, extra restart distance -.2 and wipe distance to 5mm. I still get really ugly retraction seams. From what I observed, the inside perimeter goes down fine with a negative restart distance bu...

JoelM

I am having a hard time getting rid of zits and blobs on the surface of my prints so I thought I'd reach out for help. I'm printing on a Printrbot metal simple with PLA. I've calculated my Esteps, measured my filament diameter and printed solid 20x20 mm cubes to dial in my extrusion multiplier. So w...

JoelM

I am also interested in hearing from airwolf3d users. I am about to upgrade my HD to the dual head upgrade with .35 nozzles. I've been mostly using Slic3r and Cura so far but am looking forward to using simplify3D for future parts.

Search found 5 matches

Re: Help with surface quality on Printrbot Metal Simple

Re: Help with surface quality on Printrbot Metal Simple

Re: Help with surface quality on Printrbot Metal Simple

Help with surface quality on Printrbot Metal Simple

Re: airwolf3d HD2x