I have problem slicing this model in S3D. It just generate a few toothpath in the preview.
I tried same model in cura and toothpath generated is ok.
Can anyone comment what is the problem? Thanks in advance
+1 I am using 0.3mm nozzle. Infill line width is 0.36 default, so thin that it will not be as strong as if able to set to 0.5-0.6mm. If manual set line width to 0.5mm, the perimeter will be affected resulting a larger print size and smaller internal holes. Ability yo set infill line width will helps...
Wouldn't it be good to have a feature to have "Infill Multiplier or Extrusion Line Width"? This feature is in Slic but not in Cura. Setting manual extrusion width in the Extruder Tab will also affect the Perimeter Shell Width which will lead to a bigger size print and smaller holes. This f...
HI,
I second that cura anchor point is a good. Just bought S3D and use it on the same printer. Bed sticking and first layer failure rate is very high. Would be good to add a first layer flowrate multiplier.
Please anyone can advice on this issue.