I hope you can understand what I write. The Google translator sometimes creates incomprehensible or funny phrases. I have attached here a factory file of a simple technical part to show how I can cut it my objects and how to print with dual processes with different processes, but only with a nozzle ...
Hi, I can understand your question well. Since there is no software so far, it really can help me with tricks. I cut the template into all relevant areas which I would like to adjust separately and save these as separate stl. I then put these in the slicer as for a dual print again together and make...
My extrusion width is already set correctly and this behavior has nothing to do with it since these settings have no influence on the result. For the outer perimeter shell, I can easily achieve much less material printing and especially smooth surfaces than bottom and top players. If I now divide th...
Hi, Is it possible to separate the extrusion multiplier for bottom and top solid layers from the perimeter shells and set it separately? I always have the need to use a much smaller extrusion multiplier for Bottom and Top Solid Layer for the perimeter shells to print especially smooth perimeter shel...
I've now found in another my printer how I can change the basic acceleration values by the script. This printer is running with an adapted version of me from Marlin Kimbra. If I are so Enter H there in the script over all values: M201 X2000 Y2000 Changes the acceleration in print M204 S1000 Changes ...
Somehow it is not working properly for me. How must it look like if I just want to change only the general acceleration of X and Y. If I try any other acceleration values are always set to 0 and the printer will then maximum acceleration. For this purpose, it never takes on the acceleration of the X...