Simplify3D User Forum

execcr

Sorry its late here and i forgot that with one profile (right) the parking spot was at x0 y0 and with the left profile the parking spot is at x-190 y-190 so here the (-16829)

I need now to know why after invoking M135 T1 the head goes back and not to the center of the build plate

execcr

i've checked decompiling mine x3g file that the M135 T1 command was executed once (so its not this problem https://github.com/whpthomas/GPX/issues/13 ) This is strange, look at a decompiled x3g made with left extruder profile 0: [153] Start build, steps 0: 20mmboxSX.gcode 1: [150] Set build percent ...

execcr

Hi, i have a problem on my machine with simplify3d, a problem that i'm pretty sure that on 2.2.0 version it was not there. I have recreated custom profiles for my machine starting from Replicator dual profile (left extruder - right extruder - both extruder) With the Left extruder i simply cannot pri...

execcr

Yes but i'm using Sailfish on a custom printer with Micron3DP extruder. And it matters on a calibration phase, if you want to calibrate perfectly your extruder.

execcr

Hi, i have a Micron3DP extruder that has 1168 step/mm on my machine (1/16th microstepping). In the Firmware configuration if i get over 999 step / mm (.e. 1168) the point is automatically deleted and the step/mm number become 1168000000 (zero plus or minus i cant remember the number, it was just big...

execcr

ok i made this: i generate a gpx.ini file with that code: Ok i made it work! i create a gpx.ini file like that [printer] machine_type=r1d [machine] timeout=300 [x] steps_per_mm=88.573186 [y] steps_per_mm=88.573186 then i put the gpx.ini file into simplify folder and remove the tick from generating x...

execcr

Hi, i0ve just bought simpify for my custom made bot and i have a problem with homing. I have a 500mm Z axis, and it take a while to home. In makerware i just edited "find_axis_minimum_timeout" : to 300 sec In GPX it seems that timeout is hard encoded in firmware machine options, right? any...

Search found 7 matches

Re: Replicator style machine left extruder not working

Re: Replicator style machine left extruder not working

Replicator style machine left extruder not working

Re: Firmware configuration accept only 999 step

Firmware configuration accept only 999 step

Re: GPX find axis timeout settings

GPX find axis timeout settings