Simplify3D User Forum

ProCoPrint3D

I have set the mode vase and the program has disabled the option retraction etc. and adjust the amount of the walls of an one. Then I set the amount of an amendment to the construction of walls for 3 and option remained on and do me this way. Now you trying to do that and you can not. Mode vases sho...

ProCoPrint3D

As already mentioned colleague print time can not be calculated exactly, why? Simplify 3D program would have to have the support of the firmware and retrieve data such as default acceleration, maximum acceleration, maximum FEEDRATE and XYZJERK for each axis These are the main parameters of the trave...

ProCoPrint3D

The idea of vase mode is to have one continuous strand of filament frm the bottm to the top with no retractions starts or stops. you cant do that if you have 2 perimeters. You never used to be able to use vase mode with 2 perimeters. What do you mean? But in an earlier version that were so, the pro...

ProCoPrint3D

I think at some models with a flat roof helps make the next sequence of about 3 or 5 cm before taking the roof but with filling. I just sometimes do in the middle of doing a bridge with the filament and the layers are already glued together (you must do the cooling function for the bridge for the fi...

ProCoPrint3D

I think at some models with a flat roof helps make the next sequence of about 3 or 5 cm before taking the roof but with filling. I just sometimes do in the middle of doing a bridge with the filament and the layers are already glued together (you must do the cooling function for the bridge for the fi...

ProCoPrint3D

I did gave 0% fill, increasing the width does not make sense because then it can cause outflow filament and ugly finishing

ProCoPrint3D

When will the option of converting separately and individually filament costs and individually for support? We know the cost of PVA is different than the cost of the PLA filament, the program calculates the cost of the whole but it does not make sense. For large models support PVA is very important ...

ProCoPrint3D

Netfabb I have but if I had anything to do with other programs is not enough to my desktop place

Unfortunately still I do not have a solution for model vase and it is a serious problem because I can not start printing.

ProCoPrint3D

Welcome, Why does the single outline (vase model) switches off completely control the amount Outline / perimeter Shells? After all, it does not make sense if you want to make a model vase in high resolution and wall thickness of 0.2 mm and a height of 20 cm. The program automatically makes me as one...

Search found 9 matches

Re: Vase model, cut X-Y

Re: Print times fix

Re: Vase model, cut X-Y

Re: Complex infill managment needed for large prints!

Re: Complex infill managment needed for large prints!

Re: Vase model, cut X-Y

The option of counting the cost of support and filament

Re: Vase model, cut X-Y

Vase model, cut X-Y