I'm facing this bug also. I also noticed that the first bridging layer is not affected by fan speed override. Problems I have 1) bridge perimeters print at wrong speed = brake when nozzle hit's them cuz of curling. 2) bridging fan speed overrides do not affect the 1st bridge layer. I will report this
Thank's Jim. My filament is as dry as I can get it. When I get my filament I dry it in oven and move it in a sealed container with desiccants and the humidity is around 15% in the container.
Good job, We can't get everything in one go. I work for IT-company and know what it's like to update software. Quick fixes are not made even if they are important because they need to think the big picture -> verify the bug -> come up with a solution that does not brake anything else -> testing the ...
Hi I have tried to minimize the seam and have gotten pretty good results, but I have a few questions for the wiser folk. I usually calibrate the seam with a rectangle object and see how the seam gets printed. After that I adjust coast, extra retraction etc. Untill I'm happy with the results. If I'm ...
Just wanted to notify here that everything was caused by my stupidity . Slicer works well now that I have read and studied a lot about printing settings etc.
Don't think it's moisture. The problem areas are ALWAYS the same. Exactly the same spot. Also tried with 2 different filaments and same problems, same areas
Hello again, I did a test run with these settings changed coasting distance 0,6 -> 0,2 (lower coasting gives smaller gaps as Joe said) the results are here: http://lead-space.net/bunny3.jpg better but still not there. I get those ugly lines especially to the backside. More extra restart distance (no...