SENT: G1 X61.358 Y73.043 E28.3257 WARNING: Firmware unresponsive. Attempting to force continue... this is telling you s3d sent the command "G1 X61.358 Y73.043 E28.3257", but the printer never confirms it received the command. Whenever the printer receives a command it will send a serial m...
I've only ever seen one robo3d "auto-leveler" in person, and from what it looks like they don't use an actual probe, but a mechanical switch strapped to the z-axis that is triggered or "closed" by the weight of the x-carriage/gantry. when the nozzle pushes against the bed, it cau...
Also, M104 is not the correct command for polling temperature. It should be (and is in s3d) M105 by default. Maybe your settings got changed a bit, you can change the temperature polling command in Tools > Firmware Configuration > FFF Tab under Report Temperature
Well... I what I was trying to fix with using a better support did not get fixed. While the support was good, the print was bad. I think I have another problem. See pic Sphere's a generally difficult to print because of the curvature. Try slowing down your print speed and using a cooling fan (PLA),...
The other context for the question...and its an interesting one, is "Will Simplify3D run on Windows 10 on a tablet or phone?" I think here we're in the realms of future development of the software. I can see quite easily the requirement to download a shape from the internet onto s3d runni...
And how about the "Edit Process Settings" for specific printing functions, such as bed and extruder temperature? This is set by the cart, right? Or the settings I put there can affect the print? the initial temp for bed and extruder are dictated by the specific cartridge loaded. If you ch...
if you're getting half extrusion, try doubling the infill extrusion width. So if it's 100%, bump it up to 200%. You will also want to increase your infill % if you bump up the infill extrusion width
which printer are you using and did you flash the firmware yourself or is the firmware flashed from the manufacturer? if you have a factory file taht would be helpful as well
Edit the process, click on the temperature tab and then hit Add Temperature Controller, then make sure the type is Heated Build Platform and that Wait for temperatuer to stabilize is selected