Simplify3D User Forum

thevisad

Thanks, there needs to be a +1 for these types of things, or beans, or beer.

thevisad

I am having some significant issues with Simplify3d on my printer trying to print parts for a custom job. Running the same part through Repetier host nets a perfect print every single time. I have not check marked the solid diaphragm, simply because I should not have to do this to create a solid par...

thevisad

Certainly, here you are. http://puu.sh/iJY3M/42b0445c06.gcode I don't see anything wrong with the gcode. Have you changed any of the settings in your firmware? Do all of your prints grow in the x and y axis? I didn't change any settings beyond the baudrate to try to correct the disconnect issue I a...

thevisad

Certainly, here you are.

http://puu.sh/iJY3M/42b0445c06.gcode

thevisad

what do the other corners look like? Exactly the same, it looks like the entire print started smaller on those layers and then progressively gets larger with the height. I did print with a brim/skirt and it appears that the print was offset by the size of the skirt (5 wide, 5 high, .80 from the obj...

thevisad

I designed a project box for the AVR Dragon and Dragon Rider programmer for Atmel chips in Openscad. It was designed as a rectangle with straight sides and interior posts that were of the same size as the mounting posts on the dragon. Besides the print failing to complete, you can see that the print...

Search found 6 matches

Re: Solid infill isn't solid

Solid infill isn't solid

Re: Square prints not... square!?

Re: Square prints not... square!?

Re: Square prints not... square!?

Square prints not... square!?