Loosing a seat really messes with my work flow. Like many others, I prep, slice, and preview in the office. Save a factory file to a server. In the shop load the factory file, and print. But without a second seat I can’t do that. In addition V4 doesn’t load v5 factory files, so that route is off th...
I would suggest putting a G28 X Y after the G29 Be aware a G28 will erase previous G29 results. At least in Marlin 1.19. There is a parameter in Configuration.h, line 987, commented by default. /** * Normally G28 leaves leveling disabled on completion. Enable * this option to have restore the prior...
Open the stl in OpenScad and fill the holes with cylinder([x,y,z]) commands or better in Freecad (convert stl to solid and fill the holes with a sketch).
... I've checked the integrity of stl in Netfabb, no bug in it. ....... Everyone will draw the conclusion he wants. Mine is clear. My conclusion is, after running that very model through the Netfabb online repair service it prints quite well with the above mentioned settings in 4.4.1 .... And still...
I confirm, there is a "problem" (I don't dare to say "bug") in 4.1.1 for this model. I've checked the integrity of stl in Netfabb, no bug in it. This problem is not present in S3D 4.0.1 or CURA 3.3.1 Problem occurs if one of those options is selected for start points : Use random...
AndersE wrote:by the way: i run at 250k baud and has always done since i bought this velleman k8200 as it is standard speed for that.
Same for my K8400 but this is not a problem with S3D. I have micro pauses with Vertex Repetier too.
I know that Windows 10 had some problems with USB/Serial driver in the past.