Simplify3D User Forum

Good investigation! I can't imagine any machine that moves at 200+ mm/sec wouldn't be using acceleration at all, so it's probably more likely the acceleration is just set too high in the firmware. The whole point of acceleration is to prevent steps from skipping when you try to move at the desired s...

If you want all the travel moves to use a different acceleration, you could consider turning on the M101/M102/M103 commands (Edit Process Settings > Output tab). The M101 comes before the extrusion starts, M102 after it stops, and M103 before a potential retraction. So to use a different acceleratio...

You could always trying printing a file you had already successfully made in the past without the loud noises. If you now hear the noise with the previously successful file, that might imply it's a hardware problem. From the slicing side, there re certain shapes that can tend to cause more back and ...

In S3D, you typically go to Tools > Multi Extrusion Wizard, and then use that wizard to assign parts to different colors. If you only have a single part, then you would first need to break that up into multiple parts. You can sometimes do this in S3D using Mesh > Separate Connected Surfaces. If I de...

The post-processing script is for commands that will be executed on the final output gcode file, so they operate on the entire file at once. If you want to do multiple operations, you can just keep adding the post-processing script for your first process. If you want to change the acceleration at di...

If the parts are too close together they will have to share the same raft. Try separating the parts further on the bed and see if that allows you to turn off the raft for one of them.

If that still doesn't work, maybe you can attach a factory file showing the issue.

I think there is an open feature request to add Wifi support for Bambu printers. I think that is still under investigation.

Can you attach a factory file demonstrating the issue?

You can actually change any setting that you want for different materials. Go to Edit Process Settings, click the "..." icon to the right of the Save As New button, and choose "Assign Settings to Categories". Search for "starting script" and then you can assign that to ...

I don't think there's a UI option to copy settings between completely different profiles, but you can always go to File > Export Printer Profile and export both profiles to a XML file. Then if you look at those XML files it should be easy to copy what you need from one to the other.

Search found 1547 matches

Re: Specific Print's Acceleration Is Too High!

Re: Feature based layer dependent acceleration changes

Re: Specific Print's Acceleration Is Too High!

Re: Single Extruder Multi Material Extrusion Configuration

Re: Feature based layer dependent acceleration changes

Re: Can't disable raft for a single part

Re: Bambu P1S connection failed

Re: Starting point is not constant

Re: scripts (start- and end) based on selected material.

Re: Copy "Auto Configure For Filament" profil to another printer profile