Simplify3D User Forum

You could try deleting all of the saved settings and files used by the software by following the instructions here: https://www.simplify3d.com/resources/faq/#quest-6350 Feel free to copy/backup those files first if there are important profiles you need to save. If it doesn't open even after making t...

I believe you can already add a temperature controller for a heated chamber in the Temperature tab of your process settings. We have many printers that already utilize that feature with S3D. If you need help setting it up, feel free to email our team directly at the link below and they can assist yo...

The estimate in the machine control panel uses the actual progress of the machine for the estimate. For example, if the print is 50% finished and it took 1 hour, the machine control panel will show 1hr remaining (2hrs total). Once the print is say 10% finished, the estimate should be very accurate. ...

I know we've actually had users advocate for the current solution instead of a convex hull due to huge material savings. So we probably wouldn't want to change the current behavior, but I guess this could always be offered as an additional option. One potential way to get something close in the curr...

Interesting suggestion! I agree that sometimes lifting up immediately after the extruder finishes printing can create defects, but in a lot of tests I've done adding a wipe before the lift seemed to fix it. Do you have any photos by chance showing these different results - 1) lift only, 2) wipe + li...

We already have settings available for the Snapmaker J1/J1S in V5. Feel free to contact our team directly at the link below and they can assist you:
https://www.simplify3d.com/contact-us/

It looks like you have 2 threads for the same issue, so please feel free to continue the discussion here:
viewtopic.php?t=17102

That will be a better place for us to track how many other users are also interested in this feature.

You can always email it directly to our team at the link below:
https://www.simplify3d.com/contact-us/

Are you using Simplify3D? Can you confirm which exact profile you are using?

Many times each software program will have a separate Z offset that determines the position of all other coordinates in the gcode file. So the auto-leveling just makes sure things are level, but the Z offset in the slicer basically moves the print up or down to either squish it into the bed more, or...

Search found 1562 matches

Re: non responding

Re: Overhang/shell/chamber Controls

Re: Remaining print time on Flashforge Creator 3 is incorrect

Re: Convex Hull option for raft

Re: Angled Vertical Lift After Retraction

Re: Snapmaker J1s

Re: Wifi connection issue with Raise3D Pro2

Re: Crash on open due to corrupted saved state

Re: QIDI PRO Slicer software possible issue

Re: Simplify3D Print Bed Calibration Issues