Simplify3D User Forum

The K1 made a lot of changes to the regular Klipper firmware, so it's possible they might require some kind of different changes. I would recommend opening a topic in the troubleshooting sub-forum and posting more details about the behavior.

I know a lot of starting scripts do purge and cleaning routines for both extruders, so that's one reason many of the profiles will at least initially heat both of them together. If you wanted to get rid of that, you could potentially add something like this in the post processing script: {REPLACE &q...

It's somewhat normal in my experience that the first solid layer on top of the infill isn't perfectly smooth. That's part of why you print multiple top solid layers, to allow those defects to smooth out. You could always try decreasing the solid infill speed, or potentially try higher infill percent...

In V5 you can still change the infill angle, but you can't create arbitrary sequences in a single process like V4. However, as you mentioned you can probably still create something very similar using 2 processes. The instructions would be: Setup the first process normally, but then go to the Infill ...

You can go to Tools > Machine Control Panel, and then click the "Add New" button to connect to a new printer. It will ask you for the printer profile during the new device setup, so typically you also want to go to Help > Configuration Assistant first to download the correct profile for yo...

I don't think you can typically change the extrusion width for the top layers alone, since it uses the same width as the perimeters by default. You might want to look at the ironing features, since they might help you get some of the top level surface finish you are looking for.

That's a really neat use the process system in S3D! There's all sorts of things can you configure using the processes that you just can't typically do with other programs. I know we have used it to run all sorts of other similar experiments internally so it's really powerful once you get the hang of...

Yes, this is fairly easy to do using the [build_min_*] and [build_max_*] variables. Just add the following to your starting script depending on which firmware you are using: Klipper: BED_MESH_CALIBRATE mesh_min=[build_min_x],[build_min_y] mesh_max=[build_max_x],[build_max_y] PROBE_COUNT=6,6 Marlin: ...

I haven't seen too many requests for this printer just yet, but you could try contacting our engineering team directly at the link below to see if they have been working on an early profile for it:
https://www.simplify3d.com/contact-us/

I know we've had many users contact our support team in the past saying they suddenly had something like blobs occurring all over the preview and couldn't figure out how to make it stop. In reality, the issue was only that they had enabled the Show in Preview > Retractions setting, and forgotten to ...

Search found 1413 matches

Re: [SOLVED] adaptive mesh leveling (bed mesh on print area only)

Re: Idle extruder initial temperature

Re: Inconsistent top/bottom surfaces with coarse layer height

Re: Infill angle offsets

Re: Connecting An Unknown Printer - How?

Re: Toplayer extrusion width control

Re: Interesting use of S3D processes to improve interlayer adhesion

Re: adaptive mesh leveling (bed mesh on print area only)

Re: Qidi Q1 Pro?

Re: Can't Save Preview Mode Settings