I am trying to do some parts which requires a single extrusion for the internal. When it goes to do the single extrusion, the machine jerks all the way around.
Image 7 shows the gcode file with the included calpad gcode included from the profile. This is all done using the attached version 2 profile. The software does not show the calpad being made. Not sure why although it does work fine. If you use the profile and you are having results different from th...
Tried the fff config however it appears (at least for me) the duplicate printing is trending to the left. So what happens is that either though it appears ok in flashprint the left hand side of the right extruder print, prints over the top of the right hand side of the left extruder print. Can you ...
If you use the profile I have supplied "Version 2" check to make sure the start script inlcudes the gcode you can see in the image. Also make sure the additional terminal commands looks the same as the image. You can then open up your generated g code to ensure the calpad has been added in...
Hi Joshua, Tried the fff config however it appears (at least for me) the duplicate printing is trending to the left. So what happens is that either though it appears ok in flashprint the left hand side of the right extruder print, prints over the top of the right hand side of the left extruder prin...
...This hasn't been tested on large models. Just place a small model in the centre of the build plate and slice from their. Once you are happy with how it works, play around with different sizes and positions to see if there are any limits. Simplify3D doesn't provide support for duplication and mir...
This is a 100% Fully working profile for ditto printing as it should be. it now says duplication mode on the screen and has the correct distance between the nozzles. You are able to cancel 1 nozzle if their is a failure on one side. It looks messy in the script section but this works exactly the sam...