Simplify3D User Forum

Geoff Sim

I believe this was fixed in the latest version.

Geoff Sim

Just finished running a print on my davinci pro. All I had to do was go to the Help menu, select Configuration Assistant, then I just picked the XYZprinting 1.0 Pro profile. It rearranged the build plate and loaded all the settings. I plugged in my printer and it automatically connected. I went to ...

Geoff Sim

any update about the Simplify3d for davinci Pro? Please update the status ASAP........i've buy a davinci 1.0 pro and simplify3d regards Its not difficult to export S3D GCode, and import into XYZWare Pro software, to upload to the printer. Search on Thingiverse for XYZ Pro 1.0 S3D, to download a pro...

Geoff Sim

The problem was noticed when I switch from one slicer to another. Ex, XYZWare software does not retract the filament at the end of the print (last layer). This means that each new print starts to extrude filament almost immediately, as the nozzle is already primed. With S3D, each time I start a new ...

Geoff Sim

My gcode is exhibiting an issue where the filament is retracted at the end of a print, making the start of a new print having to prime the nozzle by that retraction amount. As I have a Bowden cable setup, this erroneous retraction is 6mm. I can add an extrude in the end code for the same amount, but...

Geoff Sim

For now you can save the gcode; load it into the xyzware program; and upload to your printer. Just add this to the beginning of your start script in S3D. ; filename = simplify3d.gcode ; machine = daVinciAW10 Using this method, I have found that 50mm/s printing and 60mm/travel is a good compromise. I...

Geoff Sim

When selecting a profile in the FFF Settings, any commas in scripts are changed to newlines. For example, to change the Simplify3D line, ; infillPercentage, 0.3 to ; fill_density = 0.3 I use, {REPLACE "; infillPercentage," ": fill_density = "} However, if you select a different p...

Geoff Sim

I asked again, and got what seems to be a standard reply, Thank you for contacting Simplify3D support. I'd be happy to assist you with your question. We are currently working to add support for the Da Vinci 1.0 Pro model. We hope to have it added in our next software update very soon. As it is now F...

Geoff Sim

Can I do calculation, like something like this to raise the nozzle 10mm at the end of a print? Just use relative mode. See below. G90 ; change to relative mode G1 Z10 F3000 ; raise nozzle 10mm in Z-axis G91 ; switch back to absolute mode It's the same thing that S3D uses with their jog controls Usi...

Geoff Sim

+1 for G10/G11

Search found 12 matches

Re: Comma in script changes to newline

Re: More Info About New Version 3.1.0 Update!

Re: Does Simplify3d support the daVinci Pro yet?

Re: Erroneous retraction at end of print

Erroneous retraction at end of print

Re: Da Vinci Pro

Comma in script changes to newline

Re: Does Simplify3d support the daVinci Pro yet?

Re: Tip of the Day 8- Scripts tab, G-Code

Re: Feature request: Seperate retract/recover speed controls