Simplify3D User Forum

Landin81

Just a quick question. I have printed alot of PLA the last time with painters blue tape, and wanted to adjust the bed due to the thickness of the tape. Well I put in 0.4 in the global offset on the Z, and it worked fine, and today I was going to print abs and deleted the 0.4 due to print directly on...

Landin81

This is what I came up with, finaly got it to work with some existing gcode online and some lines deleted and added. =) Now both bedtemp and extruder heats up before the print starts. Even got the bed to lower before extruder moves over the edge. I read a old post when I google for codes, that the M...

Landin81

Open a small part - you won’t need to print it. Open the process you’d want to print it with. Go to the Script tab in the Process. In the Start script, enter a comment (they begin with a semi-colon), such as: ; It put it here In the End script, enter another comment... Prepare the Print and save it...

Landin81

Ok, so M116 override that a G28 is sent to the printer before start the print?

What ever I put in to the script, the extruder and bed is G28 anyway before print =/

Landin81

I just did a test. The bed is first heated, and when its up to 80degrees, the extruder starts to heat up. =/ Why dont they heat up at the same time? Does yours? It looks like this: http://i228.photobucket.com/albums/ee5/Loka81/th_machinecontrollnoextrudertemp_zpsjiiznons.png And when bed finiching h...

Landin81

Dont know if its the software or what it is. I want both the bed and extruder to heat up before the build is started. But I cant have both bed and extruder box checked to check the temp before build, if having bed box checked also, only the bed will heat up and not the extruder. If only having the b...

Landin81

So after a few hours of testing I think I got it. In the temperature-section of the FFF the temperature identifier was set to the wrong one on both extruder and bed. So when I started a print, s3d was waiting to get temperatures back from the printer to start the print, but there was no temps sended...

Landin81

Thanx for the answer, the firmware update unchecked helped. Here is the log. Attempting connection at \\.\COM26... Connected to machine! SENT: T0 SENT: M105 SENT: M105 SENT: M105 SENT: M105 SENT: M105 SENT: M105 SENT: M105 SENT: M105 SENT: M105 SENT: G90 SENT: M82 SENT: M106 S255 SENT: M140 S50 SENT...

Landin81

I have a Da vinci 1.0A with repetier .92 installed. Just got it installed on my printer. Leveled the bed and started s3d up. After a while I got it connected. When I start a print, the printer heats up.. Printing with PLA for the first time, well, second but the first time it didnt go well with stoc...

Search found 9 matches

global offset

Re: Check temp before begin build

Re: Check temp before begin build

Re: Check temp before begin build

Re: Check temp before begin build

Check temp before begin build

Re: wont start print

Re: wont start print

wont start print