Simplify3D User Forum

simonm

Hi ALL i've set S3D up for the Tevo Taratula however i opted for the larger bed and auto sense leveler. i think it runs a modified repetiter 0.92.8 firmware (stock). the stock S3D profile has all the sizes wrong for the bed .. and if i jsut chage bed size in options its all off center.. could you ad...

simonm

That doesn't answer any of the questions.... 1) Are you using stock CTC profile that is already included in the software? 2) Attach your factory file to this thread. You can export it from the software by going to File > Save Factory File. HI yes.. i chose stock CTC in machine config setup .. i als...

simonm

setExtruderTempGcode,M104 S$ T# stabilizeExtruderTempGcode,M133 T# setBedTempGcode,M140 S$ T0 stabilizeBedTempGcode,M134 T0 reportTempGcode,M105 fanPowerGcode,M126 S$ fanOffGcode,M127 movementOverrideGcode,M220 S$ extrusionOverrideGcode,M221 S$ laserOnGcode,M600 S255 laserOffGcode,M601 syncLaserGcod...

simonm

Hi all.
i have a CTC rep clone. dual extruder.
i'm noticing my prints are slighty under scale
while i was reading up before buying i had come across someone else with this issue and i recall they had about a 5% undersize issue,
i can't find anything about it now i have the same problem

simonm

Hi. is it possible to vary layer height in a print ? an example is printing a new filament spool with threads on each end. this is a 13cm high model with 15mm of thread each end. so on the thread ends i want good detail 0.1mm layer height but in the 10cm shaft its a waste of time having it set this ...

simonm

after much messing around , and a complete roll of pla haha
i'm nearly there
something has reversed my settings so that when the repg showed x to be to high it was really to low, ie each time it looked like i needed to enter 2 as the offset i was making it worse.

simonm

You have to set it in the firmware. I'm pretty sure you can do this from the LCD menu. If the changes you are making aren't having any affect, then you are doing something wrong. in my 2nd day of trying to calibrate dual nozzles now tried pretty much everything. upgraded and downgraded sailfish fir...

simonm

still not getting very far with this. driving me nuts. each time on the nozzle calibraion print position 1 or 2 is nearest .. i've verified the settings are changing in repg machine info .. and still wrong when printing .. tried from 29 all the way upto 36 it was all ok yesterday and claibrated with...

simonm

Hi All i'm trying after making some adjustments to somethign else to recalibtate my dual nozzles in sailfish firmware. my 'X' is way out. i've selected '1' on the X value about 4 times now and reprinted my test print and its still far out. is the setting saved immedeialty or is some sort of reboot r...

simonm

Hi All.. luckily i entered into the world of 3d printing expecting it to involve lots of tinkering . lol i bought my 1st printer last week CTC Bizer Dual Extruder Desktop 3d Printer and have stripped it and rebuilt it a few times already . a issue i am going to have very soon i think is spare parts....

Search found 11 matches

Tevo Taratula Large bed w/auto sense leveling

Re: prints slightly to small

Re: prints slightly to small

prints slightly to small

varying layer height

Re: calibrating duel nozzle sailfish

Re: calibrating duel nozzle sailfish

Re: calibrating duel nozzle sailfish

calibrating duel nozzle sailfish

CTC Bizer Dual Extruder spare parts