Simplify3D User Forum

moggie

When running several profiles, it would be useful to be able to review profile settings in a text form, and to see just the differences in each profile so that you can verify that the changes are as expected.

moggie

I'm printing test cubes with modified profiles at different heights, and finding it would be useful if there could be a base profile and then modified profiles that inherited settings from the base profile. In this way you could have modified profiles that changed a parameter such as outline speed r...

moggie

I was curious about how well a press fit part could work and created the following as a test. It worked beautifully, whereas the version of craftware for craftbot I'd been using was a dead loss on this. The hole/hexagon is 5mm diameter with a 1mm slot, 5mm total height, 3mm post height. I've separat...

moggie

Sure. See attached zip with the freecad source, stl files and factory file for the second cube. I made two cubes, the second with a top without being inset internally. The images reveal the middle skirt created in mid-air, and on the second image, the infill was ok for the top front and back, but no...

moggie

I purchased s3d yesterday to test it out, and a hollow cube without support was the first thing I tried as I wanted to see how forgiving the material could be so that I could consider this in future designs. Reviewing the layers before printing I found the same issue as you, layers in mid air. If th...

Search found 5 matches

Feature request: Profile diffs

Feature request: Profile inheritance

Press fit part success

Re: Why does Simplify3D want to start a circle in mid-air?

Re: Why does Simplify3D want to start a circle in mid-air?