Add in Tab Script inder Ending script. I use this: G91 ;set relative positioning ;G1 E-1 F300 ;retract the filament a bit before lifting the nozzle G1 Z10 ;lifts the nozzle off of the print M106 S0 ;extruder fan off M104 S0 ; turn off extruder M140 S0 ; turn off bed M84 ; disable motors Second line ...
After a lot of testing on the same object I saw the following: In slic3r I have the same problem when putting seam position on random. A lot of zilts. On nearest I get a seam in one corner, but no zilts. I can remove the zilts when changing the extract to a lower value. That means a less extract pos...
Of course I already took a look at this and tried a lot of the suggestions (and more). But with no good result. Extra Restart Distance is mentioned. But I have also the problem when there are no retractions at all. When I have retractions for every layer I only will get less zilts when making a high...
How can I get lost of these zilts? See picture: http://i215.photobucket.com/albums/cc54/glsf91/3D/IMG_1151_zpssucxd36x.jpg You see 2 on the right corner and 1 on the left corner. Problem is they are only coming when there is a travel from the inside top or bottom layer or infill to the outside perim...