Simplify3D User Forum

facebraker

hello, sorry for my bad English, but I try to give some tips: Have you specified the correct nozzle diameter in the S3D? For example, if you have a 0.4 nozzle in the Printer and you only set 0.3 in S3D , this could be the reason. Can you check if the extruder really delivers the right amount? Mark o...

facebraker

i found it in "Tools" --> "options" --> "visualization" --> "include build table in virtual environment"

Thank you

facebraker

Hi ,

I have a strange error, i don't see my printbed,
how can i switch it on?

thank you!

Alex

facebraker

Hi, i have checked the configuration, first layer high 150% and 200% doesn't work , 250% and 0.15 global offset Z works fine. very smooth surface. from left to right: IMG_3184.JPG the middle and the right are final results. 200% trial: IMG_3185.JPG Final result: IMG_3187.JPG i think that is okay? i ...

facebraker

Sorry Doug,

I have confused the top and bottom, that explains my questions.

Sorry, monday morning and not native tongue, my fault.

Ok, the bottom offset fit 0.1mm in the Z axis , result a smooth buttom surface and the rest object is relative correct.

i will test and report.

BIG thank you!

facebraker

Hi dkightley , thank you for the tipp, i will test it. for my understanding, the first layer is set to 90% to get a smooth bottom surface? that mean, the printer print always 10% to low in the Z axis? Can it also help to increase the thickness of the first layer to >100% to prevent gaps in the first...

facebraker

Good Morning, hey dorsai3d, can you help me or someone else ... In my weekend i checked the print directly without raft. Short explain: fiasco!! when i print with raft, the first layer (the extrusion) on the bed is thick with perfect adhesion the bed. Maybe is it the config of the raft , its work fi...

facebraker

I need this too

+1

facebraker

Hi Becky, thank you for your reply. I have checked the gcode file, but i didn't find a speed, do you mean the feedrate-speed? Here is my sample: ; layer 5, Z = 1.68714 ; tool H0.236 W0.300 ; inner perimeter G1 X90.982 Y74.934 F4800 G1 Z1.687 F1000 G1 E0.0000 F1800 G92 E0 G1 X92.108 Y74.557 E0.0349 F...

facebraker

Hi dorsai3d, maybe you're right. i had some problems with nonstick object, but i suspect the real problem was the missing nozzle fan. in the ground it was a thermal problem, the objects deform a loose from the bed. After i attach a nozzle fan, from this point i had no problems with deform objects an...

Search found 16 matches

Re: Issues with extruding

Re: Printbed disappeared

[SOLVED] Printbed disappeared

Re: unclean first layer

Re: unclean first layer

Re: unclean first layer

Re: unclean first layer

Re: First layer speed - FOR OBJECT

Re: unclean first layer

Re: unclean first layer