Simplify3D User Forum

totalitarian

When combining several models into one, why would simplify3d print each model in the same layer at different speeds? Notice how the belly is printing much slower than the body. Yes I do have the slow down layers under x seconds checked but even so the belly should print at the same speed as the body...

totalitarian

Did you ever get solution? Noticed mine does the same

totalitarian

totalitarian

My core xy printer has it's home position on the rear left of the build plate. I've recreated this in S3D but it automatically mirrors prints the wrong way. My printer prints exactly as S3D shows in the preview. I have to mirror the parts in the x-axis to get them to match the STL. Correct orientati...

totalitarian

I appreciate that and it's very cool that s3d can mix and match between vase mode and nine vase mode.

totalitarian

This model is fine for vase mode. Turns out the issue was my extrusion width was set to 1.2mm to give the model a bit more strength. Once I lowered it to 1mm and upped the temp it came out fine. Vase mode cut 30hrs (yes 30hrs!) from the print time

totalitarian

I found this model of a trash can https://www.thingiverse.com/thing:621711

And decided to give vase mode a go. Here is my result. Any idea what might be causing the lines? Profile attached

totalitarian

So you are having two tools, or extruders, right? You need just two processes, one for each extruder. Now, on each process you must select the model you want for the tool AND the purge/waste model. Pictures will tell you more: http://s12.postimg.org/ftw3jbndl/citi2.jpg http://s7.postimg.org/r1x7181...

totalitarian

Thanks that sounds like a good idea.

totalitarian

Imagine I am printing a cube and have set the perimeter shells to 3 with an under-speed at 40%. Is there a way to get all 3 shells print at 40% under-speed rather than just the outermost shells? This would help combat blobs. The idea is to ensure that the extruder has been ‘primed’ to be at the corr...

Search found 44 matches

Speed issue when combining models

Re: Shells Between objects, multi extrusion

Re: STL Files are mirrored on the X-Axis

STL Files are mirrored on the X-Axis

Re: Vase mode failure

Re: Vase mode failure

Vase mode failure

Re: Ooze Shield Is Printed In Wrong Order

Re: How to get all shells printed at same underpeed

How to get all shells printed at same underpeed