Simplify3D User Forum

munchit1

Hi all, again. having trouble setting the height on the bed printing, basicaly the nozle keeps starting too high above the bed and will not lower no how.. the nozzle homes to a leval 0.25mm, the width of the paper...layer height 0.3mm with a 0.4mm nozzle (tried down to 0.2mm). to my reconing lowerin...

munchit1

hi all, on repetier host the nozzle temperature reach's it' set temp, in simply 3d it always settles between 1 or 2 degree's short and never starts the print. is there an adjustment for the temperature readings at all? or how do i sort this out? it's a Melzi 2 V3 tronxy board running repetier 9.1 (n...

munchit1

faize 2 and n0 two 1kilo spool later.

ok..why wont the multiplier work?

i'm at 2% of 60 aparently equals 40mm/s...

munchit1

if i set the bridge speed multiplier to 10 percent does it lower the speed that it bridges accross the gap?

edit, i'll refraize that to should it lower the speed?

munchit1

hi all, i'm near on giving this up as a bad job here.. basic question, do you have to recalibrate for dimentions everytime you do a new model? i'm literaly chaising my tail here, 1 kilo of test prints to calibrate later i have nothing to show. set the steps per mm in marlin, do a print its ok, set u...

munchit1

found 1 issue, running 64bit win10 to marlin on 16 or 32bit controler boards. had help on that but run as administrator and set the program to run 'as win7'..cleared some issues up. regaurding the top/bottom infill, (not the infill e.g. honeycomb infill bit) printing more layers only water tights at...

munchit1

Thank you for the reply.

i'll try a fresh install on the printer and simplyfi and see how that does.

and of course re calibrate from scrach.

munchit1

ahhh verticle lift, thank you for that. A. Set the speeds. visualy you see how fast its printing the plastik, on the image attached first box is set to 40mm/s, tisnt that fast when you've had succesfull 120mm/s print speeds, well every now and then it'll print at some very very fast rate for no reas...

munchit1

hi all..got some weird things going on. A. set the speed to 45mm/s result, aything from 45 and some where in the region of 80 - 85mm/s randomly happens.(then doesnt then does.) B. no matter what infill thickness i set it remains the same. (i gave up at 200%) cannot get a water tight top or bottom la...

munchit1

and a thank you to the people who made this program, i've spend four weeks going through every program i could find, and all had at least one thing rong that made it useless, but most of all i couldnt use any to print from a pc, silly things like printing some wird squigldy print some where else on ...

Search found 13 matches

Z-height problem

Temperature never reachs

Re: bridge speed multiplier

bridge speed multiplier

settings

Re: the fun begins...

Re: the fun begins...

Re: the fun begins...

the fun begins...

Re: print begins withour reaching temperatures