I'm not sure where to go from where I am. the prints mostly look good but I'm having trouble with holes, not the typical smooshed hole thing but what appears to be filament build up on either side of it. I'm still playing with the accel and jerk setting in the firmware to make it better, but I don't...
try this, make a new profile, with all the info of the one you are using now. see if the behavior changes. We have been experiencing random things like this in my printing group.
well turn your fans off ( I know I know) and do a the PID, once that completes you can turn your fans on if you want. If you happen to have the Little MOnster then keep your fans below 50% until you get your hotend insulated. The fans are overpowering the hot end, esp if you haven't completed the PID.
Myself and a few others have experienced the profiles failing to accept changes. This has been happening with users in my Tevo Little Monster group. I noticed it when the head of the printer was dragging along the print when it should have been lifting (retract vert distance) I made a new profile wi...
no matter how I have set things in bridging, it doesn't show that its triggered/going to use the bridging setting in the preview after slicing. It usually does show it. I even set the threshold down to 0.1 and the speed up to 999 I got nothing baby! this is a fairly new install, Win10, tons of RAM a...
Okay I think I'm over thinking this, or missing something. My probe is a BL Touch, when I do G30F200 it returns 510.575. this is the distance to the probe tip. Since its Gcode would it know what I have in the firmware for the probe height and do the math for what it thinks Z0 is? Or is this just the...