Simplify3D User Forum

vindolin

If this feature were implemented, you'd most likely still have to redo custom supports. There's really no way for the application to know how to adapt something it didn't generate. Nobody expects the software to perform magic, but to make common cases less sucky. Almost every other slicer has this ...

vindolin

vindolin

+++

That was the first feature I was looking for in the 4.1 changelog

, it would make the design workflow, especially with more than one part, so much easier.
C'mon Slic3er, Repetierhost and Cura have it too!

vindolin

Fixed......check the Bridging settings! :roll: :roll: It took 30 seconds to sort out.....you should have taken the advice given! I took the advice, and that did not work. But it looks like you also enabled the "Use fixed bridging infill angle" option, which fixed the problem in combinatio...

vindolin

Thank you, yes I'm using 4.0.1.
I tried changing those settings but it made no difference.
Here's my factory file:

vindolin

I tried printing a heat tower and noticed little filament loops hanging from the bridging. When I checked the preview mode, I saw that S3D made the same amount of bridges as my perimeter shell count and then zigzags the space between the bridges. I tried all settings but the only thing that helped, ...

vindolin

Works, thank you!

vindolin

I've added a 1cm bumper to the carriage that hits the endstop switch on the y axis because I've added a fan on the backside of the extruder which needs a little extra room. I've substracted one cm from the build volume y but now the line for cleaning the nozzle gets printed into the air in front of ...

vindolin

Search found 9 matches

Re: Reload Part

Re: More Speed Options

Re: Reload Part

Re: Infill between bridging.

Re: Infill between bridging.

Infill between bridging.

Re: Changed endstop position, what settings?

Changed endstop position, what settings?

Re: Reload Stl-file from disk