Simplify3D User Forum

MakerTech LLC

Is there a way to request S3D to send an audible alert when a specific bed temperature has been reached (when not yet printing)

MakerTech LLC

Thanks, Doug.

Turns out I *STILL* didn't supply enough data - we don't use the bottom profile for that print, but the one near the middle named "ABS 50% on 2 50% fan".

Can you list and describe what tweaks you made?

Your assistance is most appreciated!

MakerTech LLC

This post SHOULD now provide all data needed to diagnose the problem previously described: 1) Machine hardware/software inventory attached; 2) Closeup image of defective print attached; 3) Factory file of print in image attached Any assistance appreciated. Machine hardware/software inventory • Windo...

MakerTech LLC

Dear Horst;

"Nevertheless try out to set INFILL >>> Minimum Infill Length down to zero (now 1 mm)."

Checking with my associate revealed that we had indeed tried the 0.00mm Minimum Infill Length setting.

Thanks!

MakerTech LLC

Dear Horst; Thank you for your helpful reply! "A FFF-Profil doesn't replace a FACTORY-File! A factory contains also the STL of the model and this is needed to find out the reason." I have read that the S3D Terms of Service prohibit publicly posting Factory Files, and that specific queries ...

MakerTech LLC

1) Have tried various Advanced setting changes to improve thin wall printing with no visible change. 2) Profile attached. 3) Print image attached. 4) Machine Specifications:: Windows 7 Home Premium 64 Bit SeeMeCNC Rostock MAX v2 latest Arm, Carriage, and Hot End upgrades EZRstruder Upgrade HE280 Hot...

MakerTech LLC

Thank you for your timely response, Mr. Kightley.

I learned decades ago that I'm always at my smartest when picking others' brains!

MakerTech LLC

An .STL file from Thingiverse was imported into Sketchup, defects cleaned up, until no defects were reported either by CleanUp2 or Sketchup itself upon Saving. Preview in 3DS showed a solid block, and in fact a short print attempt began with a solid bottom even though there were openings all through...

MakerTech LLC

After both temperatures have been reached and stabilized, clicking [Print With USB] results in a status display of "Printing", but no printing ever results, even after minutes of waiting. Both temperatures remain at specified print levels. Clicking [Emergency Stop] then [Print With USB] be...

MakerTech LLC

Changing a setting in FFF requires making the change, clicking OK, disconnecting from Rostock MAX V2, closing S3D, cycling printer power, then restarting S3D and reconnecting.

What are we doing wrong?

Search found 10 matches

User Defined Alerts

Re: Thin walls not Infilling and Top Layers not sealing

Re: Thin walls not Infilling and Top Layers not sealing

Re: Thin walls not Infilling and Top Layers not sealing

Re: Thin walls not Infilling and Top Layers not sealing

Thin walls not Infilling and Top Layers not sealing

Re: Cleaned .STL Appears Will Print As Solid Block

Cleaned .STL Appears Will Print As Solid Block

Hang Before Printing Starts, Requiring ESTOP, Then Print w/USB Again

Changing Setting Requires Disconnect, Stop S3D, Cycle Power+