Simplify3D User Forum

mark_3d

Mark, Thanks for the suggestion. I'll be sharing your idea with our development team. In case you haven't tried it already, you can currently tweak your bridging settings (particularly unsupported area threshold) to have bridging overrides applied to large enough areas printed atop supports. Defaul...

mark_3d

Add speed control for the first layer on top of the infill and on top of the supports. If the first layer on top of the infill is printed to fast you need to increase to much the top layer quantity to achieve a good surface.

mark_3d

Add the possibility to control the speed of the dense support.

mark_3d

Why if i print with raft my nozzle start to print far away from the bed hight? i have ho enter a -0,55 offset to the z axis to compensate that gap.

mark_3d

How to ceck if it's enabled in my firmware? i have a Rasie3d N2 duale Extruder.

mark_3d

Is it possible to insert a beahavior like the linear advance used in marlin firmware that will give the print a little bit more quality?

mark_3d

Is it possible to add a feature that can controll the small detail of a print? For example if i'm printing and have dual extruder, on one a 0.6 nozzle and one with a 0.2 nozzle, tell the printer to print small detail with the 0.2 nozzle and the rest with the 0.6nozzle.

mark_3d

As mentioned in the title, it will be helpful to control the distance between the model and the prime pillar. It's happen that when i'm printing with two materials (pla and pva) the prima pilla broke and affect the print.

Search found 8 matches

Re: Speed control first top layer

Speed control first top layer

feature request: dense support speed control

Raft Printing

Re: Feature Request: Linear Advance

Feature Request: Linear Advance

Feature Request: Smal detail control

Feature Request: Prime Pillar Distance