Simplify3D User Forum

DotScott1

Thanks for answering - I figured it out. It appears that Cura has another way of allowing extra overlap where S3D requires some certain amount of perimeter in order for it to work. I will say that the Cura method does work much better on bridging. It basically extends the bridging into the perimeter...

DotScott1

Anything?

DotScott1

Hey all, I've been searching for a little while and doing several tests but I can't seem to find the answer... In Cura, the equivalent of Bridging "Extra Inflation Distance" will inset the bridging to where it actually extends INTO (beyond the walls of) the print parameters which results i...

DotScott1

Hi DotScott1, I've got the exactly same issue using the volcano on a very expensive (>40K) printer. I've even dropped down to a 0.4 nozzle with similar results, better but no where near as good as my $500 CR-10s. I'm just about to post a Marvin in the hope someone might see something I could do to ...

DotScott1

Alright so... it's been a year or two since I've asked and I STILL have not perfected settings for my 0.8mm volcano nozzle/hot end on my CR-10S 400... They still just don't come out very clean. Either the walls look great but the tops and bottoms look bad OR the tops and bottoms look good and the wa...

DotScott1

Also I forgot to post my setup:

Octoprint connected to Creality CR-10S 400 printer.

DotScott1

HA! No kidding!... this was just fixed with the latest update (4.1.1)!! WOO! Wow I just downloaded the latest software today and this problem is just... gone. Everything works perfectly now because it counts the first layer of ALL objects on the bed as layer one (instead of layers 1, 2, 3, etc). Aa...

DotScott1

HA! No kidding!... this was just fixed with the latest update (4.1.1)!! WOO! Wow I just downloaded the latest software today and this problem is just... gone. Everything works perfectly now because it counts the first layer of ALL objects on the bed as layer one (instead of layers 1, 2, 3, etc). Aah...

DotScott1

I personally would alter the Gcode at the given layer (height) you want to stop at then place the command to pause, that is what I do, from your example are you creating a script to do this,, if so I think that's too complicated for me.. and I would do two prints. Well, that's basically what this s...

DotScott1

Anything? ...

Search found 16 matches

Re: Bridging Extra Inflation Distance Does Nothing?

Re: Bridging Extra Inflation Distance Does Nothing?

Bridging Extra Inflation Distance Does Nothing?

Re: Volcano 0.8mm Nozzle on a CR-10 - Settings?

Volcano 0.8mm Nozzle on a CR-10 - Settings?

Re: Pause at Height (NOT LAYER)?

Re: Pause at Height (NOT LAYER)?

Re: Pause at Height (NOT LAYER)?

Re: Pause at Height (NOT LAYER)?

Re: Pause at Height (NOT LAYER)?