Simplify3D User Forum

dadoblu_2000

Hi, I have a modified ultimaker 2 printer with an ultimaker 3 extrusion head, I would like the print area to be modified based on the use of active extruders as happens in Cura, thanks

dadoblu_2000

I'm using a dual extruder printer, but I'm having a problem managing the fans that cool the part, I print two materials, on the primary extruder I use ABS while on the secondary extruder I use PLA, I set the ventilation of the part on the extruder with ABS at 15% while I set the cooling of the part ...

dadoblu_2000

apparently S3D does not allow you to edit a mesh, I try to select the command indicated using Mesh > Separate Connected Surfaces but the message that I get back is: The selected Mesh is already a single surface.
is there any external tool to S3D that allows you to color the meshes?

dadoblu_2000

To do what you want, paste this into the Pre Retraction Script: {IF "[current_layer_number]==1"} ; dont retract E[retract_distance] I tried but it doesn't work properly, it would also be necessary to have a function that triggers the retraction, because otherwise there will be an excess o...

dadoblu_2000

I would like to use S3D to make multicolor prints, I have a Tradrack connected to my printer with Klipper firmware, I currently use prusaslicer for multicolor/material prints but I don't like it!! I would like to know if there is a guide to configure S3D with multi colors, in my case 8 colors with a...

dadoblu_2000

Hi I have a Delta printer with a single tool and a multi material mechanism, similar to MMU, I would like to create profiles with simplfy3d, I am currently using Prusaslicer, which allows a tip tuning before retraction, my printer does not have a wire cutter, my question is: in S3D where can I make ...

dadoblu_2000

ok thanks I'll try it!

dadoblu_2000

I have a problem with a command line related to the g-code created by simplify3d, I have done various tests in the configuration but the gcode is always produced in the same way, I have a modified ultimaker2 printer with a double extruder, I am noticing that after the nozzle spitting phase a command...

dadoblu_2000

hi all who can help me with the tool change script?, in essence I would like that when I change the extruder there is a wait so that the temperature reaches the right temperature before it starts printing, currently it starts printing immediately without waiting for it the temperature is at the righ...

dadoblu_2000

Greetings all, trivial question, is it possible to add information to the gcode generated by S3D? I would like the file to show the type of printer, nozzle diameter, material, etc. if so, what should I configure and where?

Search found 11 matches

Change print area based on extruders

cooling fans object

Re: Single Extruder Multi Material Extrusion Configuration

Re: V5.1.2 generation of unwanted g-code commands

Re: Single Extruder Multi Material Extrusion Configuration

Single Extruder Multi Material Extrusion Configuration

Re: V5.1.2 generation of unwanted g-code commands

V5.1.2 generation of unwanted g-code commands

tool change script

information about gcode files