Simplify3D User Forum

Syafiq

If the "scaling" is on the side that touches the bed, your nozzle is ever so slightly too close to your bed. Increase the distance and that'll go away. Hi I followed your recommendation and it works perfectly. Thanks for the advise. I'm currently doing some offset calibration to ensure al...

Syafiq

Hi all I've been wracking my mind and spent a good 20 hours now to get my issue solved. I currently trying to print something using transparent material. So i have been doing some test print ( 5 min print job) to see if all my setting are perfect before starting for the actual product. I attached so...

Syafiq

Hi all Is there any setting ( i'm not sure if i missed any setting about that ) that allow the user to offset the Z-axis. My printer will print parts with below condition without raft : part height will reduce ~ 0.3 mm from actual height with raft : part height will be +/- 0.1 mm from actual height ...

Syafiq

After experimenting on few settings, i manage to have result with decent quality. Turn out my printing speed is way too fast; instead of 1500mm/min as suggested in few sites and guidelines, i'm using 2200/2700 mm/min. Changed to 1900mm/min did the trick. Now still finding the balance between printin...

Syafiq

Looking at your photos, it looks as if you are having more than just issues with using PVA as a support material....and from the information you have given, its going to hard for anyone to give really useful advice without a lot more information. Could you attach a factory file (or two) for these p...

Syafiq

hi all i was wondering on what are the cause of my printing issue using PLA and PVA support material. The area that touching PVA support area will have obvious lines and missing features. I attached 2 image for your reference. my setting are as below Product / extruder 1 material : PLA Layer height:...

Search found 6 matches

Re: Scaling on surface

Scaling on surface

Z axis offset

Re: Need help on PLA and PVA printing

Re: Need help on PLA and PVA printing

Need help on PLA and PVA printing