Simplify3D User Forum

nfol

Why does the attached factory file not produce an ooze shield at all?

I had the same with prime pillar.

Best regards,
Niels
FlashForge Dreamer

nfol

Hi, I wanted to print a black piece with white text. For this I defined a custom zone from height 0 to 2 mm for the right nozzle (black, process #1) and a zone from 2 mm for the left nozzle (white, process #2). I defined extruder temperature for both nozzles. But: the printer only started raising th...

nfol

Hi,

I use a FlashForge Dreamer which has 2 nozzles.

I have not printed with 2 colors before.
Now I want to use black in the lower part and white at the top of a model.

How do I do this in S3D? Which settings?

Best regards,
Niels

nfol

Now, I tried to regenerate the gcode without any other change. Now it works.

nfol

S3D Version 4.1.2. I am trying to print a simple nozzle. For some reason, printing stops about 1/4 into the model (after 6.2mm height exactly, 2 times). The printer (Flashforge Dreamer) goes back to rest position as if the job is finished. I attach the factory file. The gcode file is too big (3,6 Mb...

nfol

Hi SD3-Jason > Try changing then last line to this: > G1 X-100 Y74 E20 F2000 ; extrude line along the left edge Thank you! It works partially. It extrudes a line along the left edge as wanted (too long for that edge, though). But afterwards it extrudes a very thin line very, very slowly diagonally t...

nfol

I see. Thank you for your reply. To be sure, here are all lines before the actual line: M146 r255 g255 b255 ; Set lights to white while preheating M907 X100 Y100 Z40 A100 B100 ; Set motor current M132 X Y Z A B ; Recall home offsets M612 X34.5 Y0.0 ; Set toolhead offsets M108 T0 ; Change to right ex...

nfol

In Script, I have this:

G1 X90 Y-74 E24 F2000 ; Extrude a line of filament across the front edge of the bed

I would like to move this line of filament to the left edge of the bed.
What should the linhe look like?

Best regards,

Niels
(Flashprint Dreamer)

nfol

I'm surprised that the company does not respond to those claims.

nfol

Dear DrD Thank you so much for your kind reply. I changed the following: Global GCODE-offset Z: From 0.00 to 0.15 Extrusion multiplier: From 0.95 to 1.00 Infill outline overlap: From 20 to 30 %. That helped a lot. I think that I cannot expect the parallel strings to be completely connected, right? I...

Search found 36 matches

Where Is My Ooze Shield?

Process #2 starts too early.

Two Color settings?

Re: Printing stops.

Printing stops.

Re: Script line help?

Re: Script line help?

Script line help?

Re: Things you've taken away in V5

Re: Too big spaces in layers