Simplify3D User Forum

HabaaZ

@DRD Thank you for such a fast response. I have used Cura in the past but I use S3D for all my printing. I did notice that by default it did not select .gcode so I switched it before trying it the first time. This PC is a new build and I went with SSD instead of older hard drives so it was a clean i...

HabaaZ

My Powerspec Ultra 2.0 worked just fine with the previous version of S3D... Now it doesn't. I am a casual user and do not have acute technical knowledge of the inner workings/codes to make things work. I rely on the software and my ability to learn. However, that said I cannot get the printer to wor...

HabaaZ

It looks like 'absolute' values because the relative box is not checked.

HabaaZ

M907 X100 Y100 Z40 A100 B100 ; Set motor current G28 ; Home axes M612 X35.0 Y0.0 ; Set toolhead offsets M108 T0 ; Change to right extruder M132 X Y Z A B ; Recall home offsets G1 Z100 F3300 ; Lower Z G1 X-110.5 Y-72 F6000 ; Move to wait position M7 ; Wait for bed to stabilize M6 T0 ; Wait for right ...

HabaaZ

I have this problem to on my Powerspec Ultra 2.0 also. After the initial wipe script the filament backs up at least a centimeter and this prevents starting of the skirt and if the part is small the first layer of the part. I cant find anywhere in the script that would make this happen. My fix is to ...

Search found 5 matches

Re: Powerspec Ultra 2.0 vs Simplify 3d 5.0

Powerspec Ultra 2.0 vs Simplify 3d 5.0

Re: Incorrect Action When Purging Filament

Re: Incorrect Action When Purging Filament

Re: Incorrect Action When Purging Filament