Simplify3D User Forum

multicopter

Thanks to ChatGPT, I managed to create a tool change script that purges the nozzles after the tool change. It took me less than 5 minutes!!!! This must be set as the Post Tool Change Script: ; Post Tool Change Script - Purge after Tool Change G92 E0 ; Reset extruder position G1 E70 F600 ; Extrude 70...

multicopter

@s3d-jason
thanks i wil try it out. any suggestion about the tool change script?

thanks,
andy

multicopter

hi there i wann use pla as partmaterial and petg as supportmaterial (only for the denselayer) on my idex printer. some firt attemp ware very promising, and i'm almost there! on the left extruder (T0) i use the pla and on the right exteruder (T1) is use petg material. almost everything works, but two...

multicopter

hi does anymone now what is the g-code in the "Tool Change Script" fore following case: right after toolchange i want that the new toolhead first extrude (right in the parking position, so no move ) 50mm of material, befor he start to print? the actually Tool Change Script is: {IF NEWTOOL=...

multicopter

thx @marac
i give this a try in the next few days ( when i have the next print with support ).....

multicopter

I have the new craftbot flow idex printer. the printer is not in the list of supportet printer. so i took the craftbot 3 which also have two extruder, but ist not idex. i make some small changes ( bedsize ) etc.. now i have some minor ( i hope so ) issues. i wanna start with the "bigges" i...

Search found 6 matches

Re: Tool Change Script ( Craftbot Idex Flow ) S3D V5.0

Re: Tool Change Script ( Craftbot Idex Flow ) S3D V5.0

Tool Change Script ( Craftbot Idex Flow ) S3D V5.0

Re: Tip of the Day 8- Scripts tab, G-Code

Re: Simplify3D with Craftbot Flow IDEX / Dual Material

Simplify3D with Craftbot Flow IDEX / Dual Material