Search found 8 matches
- Mon Aug 29, 2022 9:49 am
- Forum: Troubleshooting and Bug Reports
- Topic: Trouble Above Supports
- Replies: 18
- Views: 9596
- Jump to post
Re: Trouble Above Supports
primary layer height 0.27mm on 0.4mm nozzle
- Tue Aug 16, 2022 1:30 pm
- Forum: Troubleshooting and Bug Reports
- Topic: Trouble Above Supports
- Replies: 18
- Views: 9596
- Jump to post
Re: Trouble Above Supports
Thats a huge help, not sure why it changed to 130 but i had it set to 50% for the bridging multiplier originally. I will try this way i am also curious if there is recommendation for how the part should be printed? Whenever i print the part flat it doesnt show as a solid "blue" outlined pa...
- Tue Aug 16, 2022 9:59 am
- Forum: Troubleshooting and Bug Reports
- Topic: Trouble Above Supports
- Replies: 18
- Views: 9596
- Jump to post
Re: Trouble Above Supports
I have done some prints with bridging on perimeters settings. My typical settings consist of the following: unsupported area threshold: 5.0 sq mm extra inflation distance: 0.00 mm bridging extrusion multiplier 80% bridging speed multiplier: 130% used fixed bridging infill angle: 0 deg Apply bridging...
- Mon Jul 25, 2022 12:50 pm
- Forum: Troubleshooting and Bug Reports
- Topic: Trouble Above Supports
- Replies: 18
- Views: 9596
- Jump to post
Re: Trouble Above Supports
Ill try that but i did that a while ago and the support fused with the model. possibly the filament was bad. Thank you.
- Mon Jul 25, 2022 10:47 am
- Forum: Troubleshooting and Bug Reports
- Topic: Trouble Above Supports
- Replies: 18
- Views: 9596
- Jump to post
Trouble Above Supports
Hello everyone, i have been searching all over the support section and cant seem to find an answer to my question. I have read the "poor surface above supports" section and have done everything but nothing seems to be the fix. My main issue is attached in the pictures below. The area above...
- Tue Mar 15, 2022 4:19 pm
- Forum: General Discussion and Tips
- Topic: Top and Bottom Layer Gaps
- Replies: 5
- Views: 2895
- Jump to post
Re: Top and Bottom Layer Gaps
For more information, other settings are listed below: -top solid layers: 5 -bottom solid layers: 5 -outline/perimeter shells: changed between 3 & 5 -horizontal offset from part: 0.7mm -upper vertical separation layers: 3 -lower vertical separation layers: 3 -printing speed: 4200mm/min -bridging...
- Tue Mar 15, 2022 2:41 pm
- Forum: General Discussion and Tips
- Topic: Top and Bottom Layer Gaps
- Replies: 5
- Views: 2895
- Jump to post
Re: Top and Bottom Layer Gaps
I have tried with the layer heights and around 3 for the vertical upper and lower seems to work best. I will try another print with the layer height decreased from 0.4mm to 0.3mm. The only issue is the print takes a very long time so no results show until a day later. Once this print is done i will ...
- Wed Mar 09, 2022 3:35 pm
- Forum: General Discussion and Tips
- Topic: Top and Bottom Layer Gaps
- Replies: 5
- Views: 2895
- Jump to post
Top and Bottom Layer Gaps
Hi everyone, i have recently been working with a Builder Extreme 2000 printer. It is mainly used for large scale prints and has dimensions of 700 x 700 x 1700 mm. Currently i am trying to print an air intake for a bike which will be provided below. As you can notice from the pictures, the top and bo...
