Simplify3D User Forum

It looks like you have 2 threads for the same issue, so please feel free to continue the discussion here:
viewtopic.php?t=17102

That will be a better place for us to track how many other users are also interested in this feature.

You can always email it directly to our team at the link below:
https://www.simplify3d.com/contact-us/

Are you using Simplify3D? Can you confirm which exact profile you are using?

Many times each software program will have a separate Z offset that determines the position of all other coordinates in the gcode file. So the auto-leveling just makes sure things are level, but the Z offset in the slicer basically moves the print up or down to either squish it into the bed more, or...

It could definitely help to attach a factory file so others could try to reproduce the issue. I should also mention that V5 added several new slicing modes to help it deal with different mesh issues. They are explained in more detail on this page: https://www.simplify3d.com/resources/articles/identi...

On their wiki they already talk about running gcode from 3rd party apps, so that should still be possible https://wiki.bambulab.com/en/software/bambu-connect?ref=blog.bambulab.com "To start a print, import the gcode or 3MF file by either dragging and dropping the file in Bambu Connect, or by cl...

Here's a recent thread that was very similar. I bet the same solution would work for what you described.
viewtopic.php?p=73961

If you're new to gcode, there's a useful tutorial here that explains most of the common commands: https://www.simplify3d.com/resources/articles/3d-printing-gcode-tutorial/ The script that you posted looks like it was written for a different slicer, so there are several commands you would need to cha...

Is it possible to add a feature in Simplify3D that can automatically change acceleration based on different actions, like for extruding or travel moves Yes, the steps I mentioned above can actually be used to do exactly that! Go to Edit Process Settings > Output tab, and turn on the "Include M...

Good investigation! I can't imagine any machine that moves at 200+ mm/sec wouldn't be using acceleration at all, so it's probably more likely the acceleration is just set too high in the firmware. The whole point of acceleration is to prevent steps from skipping when you try to move at the desired s...

Search found 1566 matches

Re: Wifi connection issue with Raise3D Pro2

Re: Crash on open due to corrupted saved state

Re: QIDI PRO Slicer software possible issue

Re: Simplify3D Print Bed Calibration Issues

Re: Bug: v5.1.2 adds plane where it doesn't belong

Re: bambu connect

Re: Software closes 2 seconds after opening

Re: Start Gcode Query - Creatbot F430

Re: Feature based layer dependent acceleration changes

Re: Specific Print's Acceleration Is Too High!