Simplify3D User Forum

kabali16

Duplicator i3 is notorious when it comes to usb connection

I had a similar issue and I was able to connect only after replacing the usb cable and unchecking wait for start up in Firmware config.

kabali16

Hi, Is there a way to disable that annoying "Excessive Bed Temperature" Warning? or at least set the threshold to something more than 150°C. I'm printing Acetal/POM and frequently use a bed temperature of about 160°C Thanks, David. Which printer are you using ? and where are you getting t...

kabali16

I dont think you can do this for every layer. try Randomize staring points then

kabali16

I dont think so. Most commands are generic. When you say printer, are you referring to the gcode flavor ?

kabali16

1. Will I have full control of my CTC using OctoPI after having installed sailfish firmware (7.6 I believe) through the S3d software? A. Will I send g-code to OctoPi, or...? B. Will I need the GPX plugin with OctoPI? 1. If using the GPX plugin through OctoPI and not the g-code, will I loose functio...

kabali16

From S3D you can send gcode commands to the firmware to update the values. S3D does not change anything inside the firmware. For Extruder head replacement, ESteps per mm is the only parameter that needs to be changed in the firmware. Sometimes, if you are upgrading to a all metal, you can increase t...

kabali16

G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode G21 is default. G90 and M82 will automatically be generated by S3D G1 Z15.0 F10500;move the platform down 15mm G92 E0 ; zero the extruded length G1 F200 E0 ; extrude 3mm of feed stock You are telling the head to move aw...

kabali16

The Z axis only moves up and down. If you want the toolhead to move left or right (which is in the X axis), go to the endscript and change accordingly. Usually, I have seen sample end scripts having G28 X0, which takes the toolhead to the home position which is safe, if you want to do something spl,...

kabali16

yeah, I do not think those variables exist, if they do, they certainly have a different name.

kabali16

Yup, I've done this before. It's pretty easy to setup. You can configure each extruder separately to use different nozzle sizes. It's really useful since you can print the outer perimeters in high quality with a 0.2mm tip or something like that, and the print the interior really fast with a 0.8mm n...

Search found 159 matches

Re: I Can't Connect with Wanhao Duplicator I3

Re: Anyway to disable "Excessive Bed Temperature" Warning?

Re: Selecting start/end layer position in complex geometry

Re: Placeholders not working

Re: Looking to buy, a few questions...

Re: Changing heads on Tax 6...

Re: Need help with Starting script

Re: z axis home

Re: Placeholders not working

Re: Duel hotend volcano & v6