Simplify3D User Forum

horst.w

Hi together, I can print out really excelent quality with my Mankati and S3D. Normally I have no proplems with gaps, when the walls are more than 3 mm wide. Now I needed some parts, realy strong and solid printed, but the 2 mm walls end have a gap like the old problem with thin walls. I can look thr...

horst.w

Problem is nearly solved !!! I have found out what is causing the fault, but not the reason why S3D has such a reaction and doesn't print the raft. It is a drawn rectangle in the workplane-level outside the object. But it is not a surface, it has no height or depth and no capacity. I can not tag it...

horst.w

Hi @ all. .... Attachments - 3 pcs and factory-file I had attached the facrory-file but where is it ??? A new one here from this object, but it is not the same (SD formatted after writing to this forum)! Now the gcode shows for layer 1 Z = 0.6. I would say, when Z = 1.65 is a fault and prints in pl...

horst.w

Hi @ all. I have to print out an objekt with skirt, raft and support. The preview mode shows all as well but the gcode begins without skirt/raft at a high of Z = 1.65 mm I have no idea what happens. Attachments - 3 pcs and factory-file Horst, GER PreviewMode-RAFT.jpg PreviewMode.jpg GCode-Layer1.jpg

horst.w

To solve by using a second process >>> ADVANCED

horst.w

Have a look to the Model Settings (dobble-click on the object) and there to Object Size Dimensions. If this values are greather than the real objekt, there ist a rest of construction (perhaps only a little point ...) in the orbit. Creating the STL-file, both parts will be calculate as an one solide ...

horst.w

Hi,

I can not change the value of Extruder Ooze Rate (default 100 mm/s).
After checking OK-Button and reopen Advanced the new value ist allways re-changed to 100.

Best regards
Horst, GER

... Tools>General Options> Preferences >>> Save ... is checked!

horst.w

... so it happend to me some weeks ago (ViaCad). There was a second pinpoint object in a great distance I couldn't see it on the screen. Look to the "Model Setting"-window / "Object Size Dimensions", if the values there are greater than estimated, there is something flying in the...

horst.w

Thanks for your help,

I should like to understand it (technical), but the proof of the pudding is in the eating

Best regards
Horst, GER

horst.w

Hi JimC, that is the manuell support and it comes every time in a characteristic angle of 45 up to nearly 90°, related to my selfmade object. But you are right, it doesn't appear when the pillar is narrower than 4 mm. With 1,2 and 3 mm nothing happens. But the print of such small support-pillars is ...

Search found 861 matches

Gap Fill doesn't work in some cases

Re: Didn't print raft

Re: Didn't print raft

Didn't print raft

Re: First Layer Settings with Raft

Re: Center and Arrange not centering

Re: Tip of the Day 18 - Advanced Tab, a technical analysis

Re: Importing to messed up scaling

Re: Support ist looking across the object

Re: Support ist looking across the object