Simplify3D User Forum

habloIngles

Here's another try with slowed down rapid moves!

habloIngles

sounds good!

are you running the bfb file through the codex utility then sending it to the printer or are you using the bfb file I made directly?

habloIngles

I'll be interested in seeing how my file works out for you! M108 sets the deci rpm or the extrusion rate when the hot end moves from point a to point b. Convention gcode right now uses the E parameter for this, but bfb style gcode does not. M103 turns off the extrusion so the hot end can travel from...

habloIngles

I took a stab at it! Here's the test part file sliced with s3d (2.2.2). I modified the default bfb profile a bit to accomodate the changes I noticed in your bfb file.

habloIngles

The time estimates are just estimates. It's never going to be 100% accurate as settings in the firmware, such as acceleration, is very printer dependent. Most people don't even know what their acceleration values are for their printers. So I always take the estimates as a ballpark figure, and I don'...

habloIngles

After trying to read the difference of the code I found that on row 18 it says M103 witch means "Turn all extruders off" and when deleting that row it starts to print like it should.[img] Screendump2.JPG [/img] But I just cant edit that row in Notepad, then the printer cant read the file ...

habloIngles

You shouldn't have to uninstall and reinstall, going to Help > Reset All Settings should work fine. I've been using the Bits From Bytes on my RapMan printer just fine, check the scripts tab, at the bottom of the post-processing scripts, their should be a line: {EXTENSION "bfb"} When you sa...

habloIngles

are you running the simplify3D gcode through some sort of program because it looks like the s3d file has extra new lines everywhere. In the latest version (2.2.2) it looks like they updated the bits from bytes profile and it has been working fine for my printer. I contacted support and they said to ...

habloIngles

Help > Configuration Assistant > Other

Most RepRap style printers will have tons of variation and just selecting Other is the best option. I don't think they can throw in a profile since not all i3's have the same nozzle size, bed size, some dont have heated beds etc.

habloIngles

I believe it is the firmware that is case-sensitive, s3d will send in serial communication the way you type it out

Search found 80 matches

Re: CubePro Compatibility

Re: CubePro Compatibility

Re: CubePro Compatibility

Re: CubePro Compatibility

Re: Add actual job time to gcode file

Re: Rapman 3.1 prints but no filament feed. Help!

Re: Rapman 3.1 prints but no filament feed. Help!

Re: Rapman 3.1 prints but no filament feed. Help!

Re: Feature Request: MakerFarm i3v Profile

Re: Improvement to the Machine Control Panel