Simplify3D User Forum

AK_Eric

+1 : Would be a great addition

AK_Eric

I did a search and was surprised to not have seen this. In case I missed it: I'd love the ability to have internal supports . There is infill, yes, but I feel we could have something better, when you're not concerned about structural strength : Infill is great if you want to make sure the part won't...

AK_Eric

Issue I'm having is: For example, I don't want my cooling fan to turn on, no matter what, until layer 4. So in Per-Layer Fan Controls I set layer 1 to 0 , and set layer 4 to say, 25%. In my Fan Overrides section, I have both options checked. My expectation would be that the Fan Overrides would modif...

AK_Eric

I wish\request the ability print a solid diaphragm at a given layer. Or more than one layer preferably: A field that allows me to enter any number of layers to do a solid diaphragm in. This is to help with the chimney\flat roof problem. Which I will exaggerate here, but it will make the point clear....

AK_Eric

It dawned on me that S3D stores all this stuff in the header of the gcode files it writes out. So technically it's not too hard to go in there and copy\paste into some other app.

That being said, it'd be nice to have a feature that says, writes this out as .csv to be brought into a spreadsheet doc.

AK_Eric

I've seen this same issue, and agreed, it'd be nice if it used the underspeed vals of the raft. Or simply had it's own custom underspped val.

AK_Eric

Here's another one: Printing a dagger for a buddy, the blade length is around 230mm. Support pillar resolution set to 1. Overhang angle set to 45: Screen Shot 2015-10-21 at 7.55.10 PM.png Not only will the tip section fail, whole sections of the length will fail as well due to the lack of overall &q...

AK_Eric

"Sure you can, evident by other slicer software doing it just fine." Exactly danielhenley : Whether or not I want tiny support tower or a "big" big one, it should still not leave unsupported structures regardless. It should detect for the unsupported area, and then place either a...

AK_Eric

But then I wouldn't get floors or ceilings where I need them based on the layers for that process. If you look at the sample print, each section needs floors and roofs based on the design: If I turn them off,.. well, I'll get holes instead. What I don't want is S3D to make a floor\roof on the inside...

AK_Eric

Thanks CompoundCarl : I lowered the res to 1, and it put support under them. I could complain that the support is too small and sparse now, so I still now need to manually go in and add more support just so the tiny support towers won't try and tip over during print, but at least that's better. Unfo...

Search found 103 matches

Re: Dynamic layer thickness

Feature Request: Internal Supports

Fan Overrides don't respect Per-Layer Fan Controls

Feature Request: Solid Diaphragm at set layers

Re: Print out Process Settings

Re: Skirt/Brim bug ??

Re: Overhangs not being supported

Re: Overhangs not being supported

Re: Multiple Processes = multiple floors\roofs

Re: Overhangs not being supported