Simplify3D User Forum

kabali16

Closeup picture ?? Another thing you may want to look into is the Outline speed multiplier. Keep is low, I believe the extruder is not able to push through enough plastic at the speed you are printing

kabali16

Long shot, but is the coasting turned ON ? places where coasting happens typically are shown blank in the preview.

kabali16

Try printing different models, like cubes, triangles, scaled up and scaled down and see if this effect remains or disappears.

Does this happen when you print a solid model as well (like 60% + infill ?)

kabali16

haha, customizable forum interface ?

I nvr really noticed the save Draft option until you told me.

kabali16

something strange last time choosing the firmware changed the size of the bed in the preview not this time, the home position is not right either, I never set those manualy to fit my printer's configuration am I missing something ? Why are you changing the firmware settings? this should not be touc...

kabali16

That is because these layers are not detected as bridges by default. You can use multiple process - Start and stop height feature to split the top process . And for the top process, you can control the fan speed, print speed etc similar to bridging overrides.

kabali16

As standard the angle is 45° and next layer crosses the first layer. There is a dialogue for "infil Angle Offsets", but that one influences only the Internal Fill Pattern. So I have to rotate the model, which has the disadvantage that the pattern direction does not follow the direction of...

kabali16

You may have to adjust a build area slightly, but that can be done on S3D. Using Build volume and origin offsets if required. I personally have not tried different extruders, so not sure if the size is different. but I hope they did account for the nozzle position.

kabali16

I'm also very much for this feature. It is relatively doable to manually add in the G-code, but it would be much cooler and better to have it as part of the settings. There are several variables and it could be much more intelligently done in SW. E.g. how long the line is, how many lines, where it ...

kabali16

looks like a magnified elephant foot. Search for elephant foot 3D printing, I rmbr seeing an article on Ultimaker or some other forum

Search found 159 matches

Re: TPU outer perimeter not adhering to inner perimeter

Re: infill not infilling..

Re: print does not match preview

Re: annoying "save draft" button on this forum

Re: how to export settings

Re: Printing top layer using bridging settings

Re: External Fill Pattern: Angle

Re: Changing heads on Tax 6...

Re: Different priming methods

Re: print does not match preview