Search found 159 matches

Go to advanced search

by kabali16
Mon Nov 28, 2016 10:07 am
Forum: General Discussion and Tips
Topic: How to print last thre layers with different process?
Replies: 9
Views: 4793

Re: How to print last thre layers with different process?

Temperature setpoints are easy to configure as mentioned. If you want nice and smooth solid layers, just lower the speed. You can use the Solid infill underspeed setting to control this (affects both top and bottom). This is general gives a very good finish.
by kabali16
Mon Nov 28, 2016 9:21 am
Forum: General Discussion and Tips
Topic: [Solved] Print Quality Issue on Smaller Print
Replies: 5
Views: 1792

Re: Print Quality Issue on Smaller Print

Like Brian said, this one is kind of difficult to get it right. But, here is what I would suggest, 1. Place the ring's flat base on the bed, have a screenshot attached to show this 2. Support pillar resolution -> 1.0 3. Infill -> Max -~80% 4. Layer height- 0.1 or lower if possible 5. if printing wit...
by kabali16
Tue Oct 18, 2016 12:49 pm
Forum: General Discussion and Tips
Topic: Add-ins
Replies: 8
Views: 11511

Re: Add-ins

arhi wrote:is there a open api to allow 3rd party plugins?
AFAIK, there is none. again, submitting this in the feature requests section may help.
by kabali16
Tue Oct 18, 2016 12:49 pm
Forum: General Discussion and Tips
Topic: Add-ins
Replies: 8
Views: 11511

Re: Add-ins

3Drasle wrote:
kabali16 wrote:do you have any suggestions ?
A voronoi/wireframe tool would be great, is that possible?

Any time frame?
There is already a wireframe tool in the toolbar on the right.
Regarding other requests, you can post them in feature requests section. I believe S3D monitors that section frequently.
by kabali16
Sat Oct 15, 2016 11:22 am
Forum: General Discussion and Tips
Topic: Add-ins
Replies: 8
Views: 11511

Re: Add-ins

do you have any suggestions ?
by kabali16
Fri Oct 14, 2016 11:00 am
Forum: General Discussion and Tips
Topic: Multiple Raft Materials??
Replies: 2
Views: 1137

Re: Multiple Raft Materials??

Have you tried using a better build surface ? I use PrintinZ skin. This works really good, ABS in particular. Set the first layer height to 90 and width to 120. You can use brims if required. But for most cases you dont need brims.

Check this out -> http://www.printinz.com/printinz-3d-printer-plates/
by kabali16
Fri Oct 14, 2016 10:55 am
Forum: General Discussion and Tips
Topic: Change colors in Preview - Feature Type?
Replies: 4
Views: 3651

Re: Change colors in Preview - Feature Type?

Yes, I would prefer Neon for supports. Also, an X ray view of the model if possible to see supports in the interiors of a model. Cant do Cross section all the time
by kabali16
Fri Oct 14, 2016 10:37 am
Forum: General Discussion and Tips
Topic: FF Creator Pro Updated Starting script (better priming)
Replies: 9
Views: 7426

FF Creator Pro Updated Starting script (better priming)

****EDIT: Left Extruder script is updated to start priming from left********* (Jan 17) I have seen many people have issues with the starting script in Creator Pro creating blobs. Here is an updated Starting script that does a single prime line for Left,Right and Dual prints. Go to Scripts tab and u...
by kabali16
Fri Oct 14, 2016 10:25 am
Forum: General Discussion and Tips
Topic: Different extrusion multipliers
Replies: 3
Views: 1325

Re: Different extrusion multipliers

Hi, Is it possible to separate the extrusion multiplier for bottom and top solid layers from the perimeter shells and set it separately? I always have the need to use a much smaller extrusion multiplier for Bottom and Top Solid Layer for the perimeter shells to print especially smooth perimeter she...
by kabali16
Wed Sep 21, 2016 4:45 pm
Forum: Troubleshooting and Bug Reports
Topic: Problems with pause@Zpos (M322) and S3D
Replies: 4
Views: 1603

Re: Problems with pause@Zpos (M322) and S3D

Did you resolve this issue ?

Go to advanced search