Simplify3D User Forum

horst.w

Surely not the same problems but try it out: I. Re: Simplify Immediately Crashes when Opened Report this postQuote Mon May 13, 2019 3:59 pm Can you please try opening Windows Explorer and navigating to the following directory: C:/Users/%USERNAME%/AppData/Local/Simplify3D/S3D-Software You may need to...

horst.w

have a look to Tab Other, there you will find Adjustments Horizontal Size Compensation.
This is the only one possibility but I have doubt if it is the same what you are searching.

Click twice to the object, a window will open for external adjustments ...

horst.w
GER

horst.w

You have set the Retract Distance to only 0,8 mm. I guess that you have a direct extruder (no bowden), I recommend 2,0 mm up to 2,5 mm. With bowden up to 4 - 5 mm. You have not set a Restart Distance, I recommend - 0,15 mm up to -0,20 mm (negative!). And finally you have set the Retracts only when c...

horst.w

You are sure the true diameter of the filament is really 1.75 mm? The best is measuring with a micrometer screw. The multiplier (1,0 = 100%) value is only a corrective for the diameter value to adjust he extrusion. Uncheck in the Extruder tab the Coast at End box uncheck also the Wipe box both are n...

horst.w

Please attache your factory-file. Without more information it is difficult to give advise.

horst.w
GER

horst.w

T2 is the 3rd appliance.

1st : T0
2nd: T1

horst.w
GER

horst.w

M17 , M18 means to enable or to disable extruder motors: https://reprap.org/wiki/G-code#M17:_Enable.2FPower_all_stepper_motors I have never seen these commands in my gcodes, only the ending script but it contains M84 . If you attache a factory-files from a print when it happens, someone can look int...

horst.w

Hi from where you have downloaded the Corsa? There is a model in www.thingiverse.com what is running well for me. The only one complication, it is nearly not visible when opened in S3D. Select the models name in the left window and chose Edit > Drop Model to Table; than you can scale it unlimited. Y...

horst.w

Why using scripts and placeholders ??? Create your settings for each printer and store them as "Master-(printer-name)-factory in a own folder. when changing the printer you need only to open the related factory and all is fine. I myself store factories for my printers also as different files re...

horst.w

That is the question of the surface direction and not changeable. It is always going Outside to Inside. Even turning the print direction will not help (Tab Layer ...)

- adjust your construction or
- use the scaling of the model

horst.w
GER

-

Search found 861 matches

Re: DUAL EXTRUSION WIZARD CAUSES S3D TO CRASH.

Re: Tip of the Day 17 -New Feature- Horizontal Size Compensation

Re: Holes in top layer, rough surface

Re: Holes in top layer, rough surface

Re: Holes in top layer, rough surface

Re: Tool "Change"

Re: Filament stops feeding for unknown reason

Re: Fixing broken STL File

Re: Bed size variable/placeholder

Re: Print outline/perimeter shells on OUTSIDE of hollow model instead of INSIDE