josealb
Posts: 1
Joined: Sat Mar 21, 2015 6:35 pm

Re: Feature Request - Lay Flat

Sat Mar 21, 2015 6:38 pm

It's not an elegant solution but you can lay them flat in Repetier-Host and then import the STL from its working directory into S3D

Like I said, it's not elegant, but it works

JBell
Posts: 5
Joined: Thu Mar 19, 2015 9:05 pm

Re: Feature Request - Lay Flat

Fri Mar 27, 2015 6:33 pm

a very common feature in other slicers. Please include!

ImShogun
Posts: 15
Joined: Wed Jan 07, 2015 10:32 am

Re: Feature Request - Lay Flat

Wed Apr 01, 2015 8:27 am

+1 to the possibility to select a face and lay it flat on it. That would address more than 75% of the situations where you would normaly have to go back to a 3d soft, import the stl, arange it (that could take time too) and re-export it.

mitchfx
Posts: 184
Joined: Fri Feb 27, 2015 6:01 pm

Re: Feature Request - Lay Flat

Thu Apr 02, 2015 5:21 pm

Yes, please add this! There have been several times I've needed this feature but ended up rotating tiny increments again and again until the proper orientation was reached. PITA!

palawanisland
Posts: 22
Joined: Tue Jul 29, 2014 3:56 pm

Re: Feature Request - Lay Flat

Fri Apr 03, 2015 3:51 am

+1

User avatar
scott216
Posts: 26
Joined: Sat Feb 28, 2015 6:34 pm

Re: Feature Request - Lay Flat

Sat Apr 04, 2015 1:26 pm

I'd like to see this too. Is there currently a way to tell if your object is flat or not?
--------------------------------------------------------------------
Makerbot Replicator 2
Upgraded Aluminum Arms, Alucarriage, Alu-X-Ends and 3-in-1 Extruder
Mac OSX v10.9.5

drmaestro77
Posts: 7
Joined: Fri Feb 27, 2015 5:26 am

Re: Feature Request - Lay Flat

Sat Apr 04, 2015 2:17 pm

+1 This is a very important feature.

Yona.Appletree
Posts: 10
Joined: Thu Feb 26, 2015 3:38 pm

Re: Feature Request - Lay Flat

Fri Apr 10, 2015 7:43 pm

+1

I end up using Cura to break apart and lay my parts flat, then export/import into STL. If s3d had "split into multiple models" and "lay flat" I could do it all in s3d.

User avatar
mvansomeren
Posts: 11
Joined: Sun Apr 05, 2015 3:19 pm
Location: Northridge, CA - USA

Re: Feature Request - Lay Flat

Sat Apr 11, 2015 11:11 am

+1000!
___________________________________________________
Proud owner and builder of the Rostock MAX V2

solution0
Posts: 2
Joined: Thu Mar 19, 2015 9:59 pm

Re: Feature Request - Lay Flat

Sun Apr 12, 2015 4:46 pm

Agree, very important missing feature

Return to “Feature Requests”