Page 1 of 1

Material/Print Quality settings grouping

Posted: Mon Jan 06, 2020 12:33 pm
by brashendeavours
In the UI there are dropdowns to configure both Material and Print Quality.
It is not straightforward for the user to know what settings are being saved/configured when selecting each of the dropdowns, and worse which settings are being saved by each.

Descriptions:
Material: Automatically configure temperature and extrusion settings for the selected material.
Print Quality: Automatically configure layer height, infill percentages and other related settings for the selected quality level.

This request is for a better UI presentation of what settings are being configured/saved by Material/Print Quality.
The change could be in the form of:
[*] grouping of tabs under Material and another grouping under Print Quality (settings not saved by either could be ungrouped tabs)
[*] annotation by color or asterix (double asterix) to indicate which settings are saved by Material (Print Quality)

Thanks for listening! Great product!

Re: Material/Print Quality settings grouping

Posted: Wed Jan 08, 2020 2:34 pm
by S3D-Jake
Great feature request! Another user took the time to describe how this can be done right now. viewtopic.php?f=8&t=5977&p=25950#p25947

I'll document this a request for more of a polished solution, rather the workaround mentioned above.

Re: Material/Print Quality settings grouping

Posted: Sat Apr 25, 2020 10:54 am
by craftyham
Possibility something like this?
S3Dextrusion.jpg
S3Dlayer.jpg